Where appropriate the employer must provide the following materials for isolating securing or blocking machines or equipment from energy sources?

Locks, tags, chains, wedges, key blocks, adapter pins, self-locking fasteners, or other hardware shall be provided by the employer for isolating, securing or blocking of machines or equipment from energy sources.

What information must be included on a lockout/tagout device?

Tags should include your name, department, how to reach you, the date and time of tagging and the reason for the lockout.

Where must lockout/tagout devices be placed?

Lockout/tagout tags should always be placed with the locks that are used to prevent power from being restored. The locks can come in many different styles including padlocks, pin locks, and many others.

What is the OSHA lockout/tagout rule?

The lockout/tagout standard establishes the employer’s responsibility to protect employees from hazardous energy sources on machines and equipment during service and maintenance.

What are the exceptions to the Lockout/Tagout requirements?

Hot tap operations are exempted from the Lockout-Tagout standard if the employer can demonstrate that:

  • Continuity of service is essential;
  • Shutdown of the system is impractical;
  • Documented procedures are followed; and.
  • Special equipment is used which provides effective employee protection.

What is an OSHA requirement for tagout devices a tag must?

What are the requirements for the lockout and tagout devices? Must be durable, so that they are capable of withstanding the environment to which they are exposed for the maximum period of time that exposure is expected [29 CFR 1910.147(c)(5)(ii)(A)(1)]. Must be singularly identified [29 CFR 1910.147(c)(5)(ii)].

What needs to be on a LOTO tag?

Information On a LOTO Tag This will typically include the name of the person attaching the tag, the date on which it was attached, and in many cases, details about the work that is being done.

What must tags have on them?

Tags shall contain a signal word and a major message. The signal word shall be either “Danger,” “Caution,” or “Biological Hazard,” “BIOHAZARD,” or the biological hazard symbol. The major message shall indicate the specific hazardous condition or the instruction to be communicated to the employee.

What are requirements for tagout devices?

Tagout device attachment means shall be of a non-reusable type, attachable by hand, self-locking, and non-releasable with a minimum unlocking strength of no less than 50 pounds.

What are the four standards for lockout equipment?

According to OSHA’s guidelines, your lockout/tagout program must include energy control procedures, devices to lockout, inspections of lockout/tagout devices and mandated training for all employees. This training should be specific to each employee’s position and be relevant to their individual duties.

What is lockout/tagout OSHA?

The OSHA standard for The Control of Hazardous Energy (Lockout/Tagout) (29 CFR 1910.147) for general industry, outlines specific action and procedures for addressing and controlling hazardous energy during servicing and maintenance of machines and equipment.

Should the lockout/tagout standard apply to construction?

In the preamble of the Lockout/Tagout Standard, however, motor vehicles are discussed and the discussion on page 36657, column 1, is the basis for OSHA’s position relative to the type of motor vehicles covered by the Lockout/Tagout Standard. The context of the discussion is whether the Lockout/Tagout Standard should apply to Construction.

What should be checked when removing a lockout or tagout device?

The work area shall be checked to ensure that all employees have been safely positioned or removed. After lockout or tagout devices have been removed and before a machine or equipment is started, affected employees shall be notified that the lockout or tagout device (s) have been removed.

What are the limitations of a tagout system?

When tagout systems are used, employees shall also be trained in the following limitations of tags: Tags are essentially warning devices affixed to energy isolating devices, and do not provide the physical restraint on those devices that is provided by a lock.