Whats the difference between a 520 chain and a 525 chain?

The 5 part just describes the distance between the centers of the link pins (or wherever on the links, basically how long a link is) and the next two numbers describe the width of the chain. So a 520 chain is going to be narrower than a 525(and thus require a narrower front and rear sprocket) and lighter…

Did VX3 525 chain?

Product description. Upgraded from the DID 525 VX2 chain, the DID 525 VX3 X-Ring chain fits a wider range of street, ATV, or off-road applications up to 1000cc. New “Direct Energy Transfer” gives you amazing throttle response due to D. I. D. State-of-the-art technology to increase the chain’s rigidity.

What is 525 chain pitch?

Metric Dimensions

Chain Pitch Width
428 12.70mm 7.75mm
520 15.88mm 6.35mm
525 15.88mm 7.85mm
530 15.88mm 9.53mm

DID 525 tensile strength?

9,220 lb.
Average tensile strength 9,220 lb. 4.08 lbs. per 100 links.

How wide is a 525 sprocket?

Bicycle and Motorcycle Chain Dimensions

Chain No. Pitch Roller Width
425 1/2″ 5/16″
428 1/2″ 5/16″
520 5/8″ 1/4″
525 5/8″ 5/16″

Will 520 sprocket work with 525 chain?

A 525 chain may run on 520 sprockets, but a 520 chain is too narrow to run on 525 sprockets.

What size is a 525 chain?

525 Non-Standard Roller Chain

Part No. 525
Roller Diameter (R) 0.400
Plate Height (H) 0.585
Plate Thickness (T) 0.079
Overall Width (F) 0.376

How thick is a 525 sprocket?

Bicycle and Motorcycle Chain Dimensions

Chain No. Pitch Sprocket thickness
428 1/2″ 0.284″
520 5/8″ 0.227″
525 5/8″ 0.284″
530 5/8″ 0.343″

What maximum chain number can be used if the small sprocket is to run at 1200 rpm?

In Table 4 under 1,200 rpm and the required power rating, a chain number 40 with a 14 teeth sprocket should be used. From Table 10 it is seen that the 14 teeth sprocket in A. 5 can be bored to fit the 29 mm diameter main shaft.