What year was the Kenmore Elite HE4t made?
What year was the Kenmore Elite HE4t made?
Following the successful introduction of the front-loading Kenmore Elite HE4t in 2005 and the HE3t in 2003, Kenmore Elite is proud to showcase the Oasis HE.
How do I reset my Kenmore HE4t?
How to Reset a Kenmore HE4t
- Press and hold “Drain & Spin” for three seconds to release the child lock, if the keypad is locked.
- Press “Pause/Cancel” twice to cancel the current operation.
- Turn off and unplug the washing machine.
- Wait several minutes before restoring power to properly reset the machine.
What is the capacity of Kenmore Elite HE4t?
For 3.8 cubic-feet capacity, it is very energy efficient, has 6 fabric settings and 8 washing cycles.
How do you run a diagnostic test on a Kenmore HE4t washer?
3 Answers
- With the washer empty, close the door.
- Push “control/on” or “Start”
- Select “Drain/Spin”
- Select “No Spin” by pressing SPIN SPEED touchpad.
- Push “PREWASH” option four times within 5 seconds. (If there is no PREWASH option, press RINSE HOLD 4 times in 5 seconds.)
- C:00 should light up and begin the diagnostic.
Do Kenmore washers have fuses?
If your Kenmore washing machine does not operate at all, you may need to replace defective or blown fuses or reset a tripped circuit breaker.
How big is Kenmore Elite washer?
The Kenmore Elite HE3 washer measures 38 inches high, with a depth of 31.5 inches. The height from the bottom of the Kenmore Elite HE3 dryer to the top of the control panels measures 38 inches. The width of the Elite HE3 dryer comes in at 27 inches with a depth of 31.5 inches.
How do you stack Kenmore Elite washer dryer?
Take the paper backing strip off of the foam tape on one of the side brackets in the stacking kit. Align the foam strip on one side of the top of the washing machine. Press the foam strip into place and secure the bracket with a screw in the back. Repeat on the other side of the washer.
