What to do if Epson scanner is not working?

Make sure the scanner is turned on. Turn off your computer and scanner, then check the USB cable connection between them to make sure it is secure. The scanner may not work properly when your computer is in standby mode (Windows) or sleep mode (Mac OS X). Restart Epson Scan and try scanning again.

How do I set up my Epson scanner?

Epson Scan: Network setup

  1. Open Epson Scan Settings.
  2. Select your all in one printer or scanner from the drop down list. Note:
  3. Set Connection Type to Network.
  4. Click Add.
  5. Click the IP address in the list and click OK. Note:
  6. Click Test. Successful Test.
  7. Expand the section below depending on the test results.

How do I get Epson scan on my computer?

You can start Epson Scan by double-clicking the EPSON Scan icon. Windows: Double-click the EPSON Scan icon on the desktop. Or, click the start button icon or Start > All Programs or Programs > EPSON > EPSON Scan > EPSON Scan.

How do I reset my EPSON scanner?

Resetting the Scanner Roller Counter

  1. Make sure the scanner is turned on and connected to your computer.
  2. Do one of the following to open Epson Scan Settings: Windows 8.
  3. Click Maintenance. You see a screen like this:
  4. Click Reset. The number of scans changes to 0 (zero).
  5. Click OK.

Why won’t my scanner recognize my computer?

When a computer does not recognize an otherwise functioning scanner that is connected to it via its USB, serial or parallel port, the problem is usually caused by outdated, corrupted or incompatible device drivers. This is usually easily remedied by obtaining and installing new drivers.

How do I connect my Epson scanner to my network?

Press the Wi-Fi button on the scanner’s control panel. From your computer or device, open the list of wireless networks and select the SSID shown on the scanner label. Then select the connect option. Enter the password shown on the scanner label.

How do I connect my EPSON scanner to my computer wirelessly?

Why won’t my EPSON printer scan to my computer wirelessly?

Make sure the Connection setting is set to Network, then click the Test button. Windows (other versions): Click or Start > All Programs or Programs > EPSON > EPSON Scan > EPSON Scan Settings. Make sure the Connection setting is set to Network, then click the Test button.

Why won’t my EPSON printer Scan to my computer wirelessly?

How do I restart my scanner?

Rebooting the Scanner Software Only

  1. You might be able to get away without removing the bed from the scanner.
  2. From the “System” menu, choose “Control”
  3. In the System Manager window, choose the tab that says “MR Scanner”
  4. Press the button that says “Reboot”