What temperature do you apply Waterlox to?

During application of Waterlox wet-applied finishes (ORIGINAL, H2OLOX®, URETHANE or MARINE), the product, project surface and environment should be close in temperature and at least 50°F during application and at least 1-2 hours afterward. When both the product and surface are cold, they are less compatible.

How do you polish Waterlox?

Buff the surface and remove the scratches. Follow your sand paper procedure by hand buffing the whole surface with 0000 steel wool, again with mineral spirits for lubrication. This should also be done with little to no pressure and should be done over the entire surface.

How long does it take Waterlox to cure?

Dry time will depend upon ventilation, humidity and temperature. CURING Even though the recommended dry time is 24 hours, Waterlox Original Tung oil finishes completely cure in 30 – 90 days.

How long does Waterlox need to dry?

Waterlox ORIGINAL Sealer/Finish will dry through exposure to oxygen (oxidation). Dry time before recoating is 24 hours. Poor ventilation, high humidity or cool temperatures may increase dry times.

How long does Waterlox take to cure?

Dry time will depend upon ventilation, humidity and temperature. CURING Even though the recommended dry time is 24 hours, Waterlox Original Tung oil finishes completely cure in 30 – 90 days. There are two basic steps to the drying and curing of a Waterlox Original Tung oil finish: 1.

Should I sand between coats of Waterlox?

Sanding for adhesion purposes is not required between coats of Waterlox Original Tung oil finishes. This makes Waterlox unique and different from most surface finishes which need abrasion for inter-coat adhesion. Most surface finishes such as urethanes require the sanding process to create what’s called a “profile”.

How many coats of Waterlox should I use?

two
Apply Waterlox ORIGINAL Sealer/Finish, UTOS, MARINE Sealer or TRUETONE® Color-Infused Tung Oil following proper application and drying directions. Apply two (2) coats of Waterlox ORIGINAL Finish at the chosen gloss level with 24 hours between coats. Pour out the amount of product needed for the first coat.

Is Waterlox good for outdoor use?

Our exterior Waterlox products are created to withstand the elements. They protect wood surfaces from harsh weather and UV rays while enhancing the beauty of the wood grain. Waterlox is an excellent choice for almost any exterior wood door, bench, boat or woodworking project.

Is Waterlox waterproof?

Waterlox is a superb choice for finishing wood countertops because it produces an incredibly appealing and durable surface. It is waterproof, food-safe and easy to maintain. Waterlox literally locks out water and locks in the natural beauty of wood.

Is Waterlox a polyurethane?

Waterlox URETHANE finishes are the ultimate in clear polyurethane finishes for indoor use and outdoor use (not in direct UV).

Is Waterlox better than tung oil?

While Waterlox Original Tung oil finishes contain a superior drying oil, namely Tung Oil, they are fully cooked varnishes, which dry quicker and form permanent films tough enough to walk on and take daily abuse. Waterlox Original Tung oil finishes are also water and chemical resistant (alcohol and alkali).

Does Waterlox Harden?

Waterlox soaks in and cures with oxygen, hardening the surface, with no film buildup. It does not give a “plastic” look to wood, but gives a hand polished, natural looking finish.