What size is kitchen plumbing?
What size is kitchen plumbing?
Kitchen Drainpipe Connection Since the pipe is 1 1/2 inch in diameter, kitchen drainpipes are also 1 1/2 inches in diameter. To connect the drainpipe, use a solid metal or brass connector on the end of a piece of PVC drainpipe.
How high should kitchen sink supply lines be?
Supply lines are usually placed high enough from the floor to accommodate a standard sink faucet or toilet. For example, this means that most water supply lines will be installed around sixteen to twenty-one inches from the ground for a sink faucet.
How far from wall should sink drain be?
Rough-In Dimension Terminology
| Toilet | Sink | |
|---|---|---|
| Supply Line (Horizontal) | 6″ max from center | 4″ to left and right of center |
| Discharge/Drain Hole from Back Wall | 12 1/2″ | N/A |
| Discharge/Drain Hole (Vertical) | 0″ | 16″ to 20″ |
| Fixture (Side to Side Buffer) | 15″ to 18″ min | 15″ to 20″ min |
What is the size of P-trap required for a kitchen sink?
1 ½ inches
Bathroom sink P-traps are typically 1 ¼ inches in diameter and kitchen sink P-traps are typically 1 ½ inches in diameter.
How many fixtures can be on a 3 inch drain?
710.1 Maximum Fixture Unit Load
| DIAMETER OF PIPE (inches) | MAXIMUM NUMBER OF DRAINAGE FIXTURE UNITS (dfu) | |
|---|---|---|
| 11/2 | 3 | 8 |
| 2 | 6 | 24 |
| 21/2 | 12 | 42 |
| 3 | 20 | 72 |
What is code for kitchen sink drain size?
Yes, kitchen sink drains today are universal. They’re generally 3 ½ inches in diameter and are larger than bathroom drains, which are 1 ¼ inch in diameter. Kitchen sink drains are the same size as most standard-sized shower drains.
What size is a typical kitchen P-trap?
1-1/2”
Kitchen sink P-Traps come in 1-1/2” standard size, while bathroom sinks use P-Traps of 1-1/4” standard size. The traps also come in different material types such as propylene, ABS, brass (chrome-plated or natural), and PVC. You should use the material that is currently in place when replacing a P-Trap.
What height should kitchen sink drain stub out?
12 inches above the floor is really cutting it close. Most cabinets have a kick toe of 6 inches so you’d only have 6 inches to install and work the trap. I’d be looking at 16 to 18 inches above the floor.
How high off the floor should a water supply line be?
Supply line (height): Ideally, the toilet’s water supply line enters the room at 8 1/4 inches above the floor. More broadly, this cold-water-only pipe creates one hole between 5 and 10 inches above the floor.
