What size is 3 32 text?

When necessary, the full size set is available in the construction trailer. 3/32″ is barely legible at 1/2 size or when printing from 24×36 to 11×17. Any smaller text height will render these convenient 1/2 size drawings illegible. 1/8″ text height is preferred.

What height should AutoCAD text be?

The majority of text in a typical Autocad drawing with decimal-based units should have a plotted height of 0.08” (L80) or 0.10” (L100). Engineering and surveying disciplines assign special names to text styles according to their plotted height.

How do you scale text in CAD?

How to scale down in AutoCAD – Window select the object(s) in AutoCAD, type SCALE, and then specify a number between 0 and 1. Hit Enter. The size of the object(s) will SCALE DOWN by that factor.

What is common text height?

1/8″ is common text height (equal to 3mm in metric) and 1/4″ is used for titles. You can find this height is consistent in many resources. Remember, this is the text height on paper.

What is the ANSI standard height for text?

1/8″
ANSI states tex height to be 1/8″. Doesn’t make any difference what the size of the dwg is, i.e., 8 1/2×11, B-11×17, etc, when any dwg is plotted, text height to be 1/8″ per ANSI.

What is scale factor in CAD?

Scale Factor. Multiplies the dimensions of the selected objects by the specified scale. A scale factor greater than 1 enlarges the objects. A scale factor between 0 and 1 shrinks the objects. You can also drag the cursor to make the object larger or smaller.

What is ANSI standard height for text?

ANSI states tex height to be 1/8″. Doesn’t make any difference what the size of the dwg is, i.e., 8 1/2×11, B-11×17, etc, when any dwg is plotted, text height to be 1/8″ per ANSI.

How do you measure text height?

Multiply the drawing scale factor by the desired text output height to determine the height of the text objects in the drawing. Using the drawing scale factor of 48 and a desired text height of 3/16” for the output, you would take 48 x 0.1875 to get a final text height of 9.

What is the standard AutoCAD font?

shx” as the default font in our firm.