What size do steel studs come in?

Conventional metal studs are available in 25, 22, 20, 18, and 16 gauge steel for your convenience (1-5/8″ available in 20, 22 and 25 gauge only). Structural studs are also available.

What are the most popular metal stud widths?

Metal Stud Sizes The most common size stud is a 3 5/8″ wide stud. Combined with a layer of 5/8″ gypsum wall board on both sides will give a 4 7/8″ thick wall.

What gauge metal studs are structural?

There is no top-end thickness for studs meeting ASTM C645. However, thicknesses greater than 30 mil are typically considered to be structural members.

What are the 3 types of steel studs?

Types of Metal Framing Studs

  • C-Shaped Metal Studs. Metal studs are produced by forming the studs from strips of galvanized steel in cold rolling machines.
  • U-Shaped Channels. Top and bottom tracks for installing the studs are available in each stud size.
  • I-Shaped Metal Studs.
  • H-Shaped Metal Studs.
  • Structural Metal Studs.

What are stud sizes?

In the United States and Canada, studs are traditionally made of wood, usually 2×4 or 2×6 by name; however, these historical dimensions have been reduced but still carry the name of “two by four” and “two by six”.

Can steel studs be load bearing?

There are two main components of metal stud framing, a stud and a track. Heavier gauge metal studs are used in load bearing walls and structural applications such as exterior walls. Lighter gauge metal studs are used in non-load bearing applications such as some interior walls, half-walls, and partitions.

Are 6 metal studs actually 6?

For Wall Framing A 600S metal stud measures 6 inches on its web, or long face. Thus a metal stud taking the place of a two-by-four measures 1 5/8 by 4 inches, and a two-by-six, 1 5/8 by 6 inches — slightly fatter but the same depth as their wood equivalents.

Are 18 gauge metal studs structural?

Structural Metal Framing – Studs are a general purpose framing component used in a number of applications including exterior curtain walls, load bearing walls, headers and floor and roof joists.

Can steel studs be load-bearing?

Are steel studs structural?

Structural metal stud framing refers to the construction of walls and planes using cold-formed steel components. There are two main components of metal stud framing, a stud and a track. Heavier gauge metal studs are used in load bearing walls and structural applications such as exterior walls.

How thick is a steel stud?

Thickness: 33 mils (20ga), 43 mils (18ga), 54 mils (16ga), 68 mils (14ga) and 97 mils (12ga). 33mil (20ga) and 43mil (18ga) framing products are produced with 33ksi steel.

How much weight can a steel frame hold?

The axial load, or load weight limit, for metal studs varies widely. An 8-foot, 3-1/2-inch metal stud, for instance, may support over 2,000 pounds, while a 16-foot stud of the same width will support as little as 400 pounds.