What is the torque spec for camshaft?
What is the torque spec for camshaft?
Install the camshaft bearing caps in their original locations. Install all the bolts and tighten, in sequence, in 5-6 steps with a final torque of 100-125 inch lbs. (11-14 Nm).
What is the torque spec for camshaft sprocket on small block Chevy?
18-20 ft.-lbs.
Small Block Chevy Torque Specs
| Fastener Type | Torque Spec |
|---|---|
| Cam Sprocket Bolts | 18-20 ft.-lbs. |
| Harmonic Damper Bolt | 60 ft.-lbs. |
| Flywheel/Flexplate Bolts | 65 ft.-lbs. |
| Pressure Plate Bolts | 35 ft.-lbs. |
What is a camshaft sprocket?
The cam sprocket is attached to one end of the camshaft in a combustion engine. This sprocket, along with the timing belt and the crankshaft sprocket, is responsible for maintaining the timing between the crankshaft and the camshaft.
What is the torque of the camshaft bolts on a 1.4 T Chevy Cruze?
Reusable Threaded Fastener Tightening Specifications
| Note: All fasteners listed in this table can be reused after removal. | |
|---|---|
| Application | Specification |
| Camshaft Cover Stud [2x] | 10 N-m (89 lb in) |
| Camshaft Position Actuator Solenoid Valve Bolt | 10 N-m (89 lb in) |
| Camshaft Position Sensor Bolt | 10 N-m (89 lb in) |
What are torque specifications?
By definition, torque refers to the amount of rotational force at the point of application. When attaching a wheel to a vehicle, torque specifications are the amount of force recommended on the hardware to ensure proper installation.
How do you tighten a camshaft pulley?
Using a pair of pliers, try to pinch the belt together around the leftt camshaft pulley so that it is tight and you have a good amount of wrap around the pulley. Put your torque wrench (set at 58 ft-lbs) and 17mm socket on the pulley bolt. While still holding the pliers begin tightening with your torque wrench.
