What is the definition of cable on a bridge?

What is the definition of cable on a bridge?

[′brij ‚ka·bəl] (civil engineering) Cable from which a roadway or truss is suspended in a suspension bridge; may be of pencil-thick wires laid parallel or strands of wire wound spirally.

What is cable and suspension bridge?

A suspension bridge is a type of bridge in which the deck is hung below suspension cables on vertical suspenders. The basic structural components of a suspension bridge system include stiffening girders/trusses, the main suspension cables, main towers, and the anchorages for the cables at each end of the bridge.

What is suspension cable Definition?

[sə′spen·shən ‚kā·bəl] (engineering) A freely hanging cable; may carry mainly its own weight or a uniformly distributed load.

What is a cable-stayed bridge simple definition?

cable-stayed bridge, bridge form in which the weight of the deck is supported by a number of nearly straight diagonal cables in tension running directly to one or more vertical towers. The towers transfer the cable forces to the foundations through vertical compression.

Where is Cable Bridge?

The Durgam Cheruvu Cable Bridge is an extradosed bridge in Hyderabad, Telangana, India. The bridge is located near Inorbit Mall at Madhapur….Durgam Cheruvu Bridge.

What is cable system?

1 : a system of propelling cars, plows, or other working units from a stationary source by means of an especially endless cable and accessory tackle. 2 : rope drilling.

What is cable structure system?

cable structure, Form of long-span structure that is subject to tension and uses suspension cables for support. Highly efficient, cable structures include the suspension bridge, the cable-stayed roof, and the bicycle-wheel roof.

What is the Speciality of cable bridge?

The Durgam Cheruvu Cable Bridge is an extradosed bridge in Hyderabad, Telangana, India. The bridge is located near Inorbit Mall at Madhapur. The bridge connects Jubilee Hills with Financial District and eases traffic congestion to Madhapur across Durgam Cheruvu. Each piller it has 13 cables each side.

What is suspension used for?

Some of them are: Paint (Use of suspension) Mud or muddy water, is where soil, clay, or silt particles are suspended in water. Flour suspended in water.

How to build a small cable suspension bridge?

Building a Small Cable Suspension Bridge – the Basics Plus a Video Demo Step 1: The Design. Here is our design for an 80’ long walking bridge that spans our creek and is set back far enough… Step 2: Install Four Posts. After clearing a site, we installed four posts. Step 3: The Dead Men…. Dead

What is a suspended bridge?

: a bridge that has its roadway suspended from two or more cables usually passing over towers and securely anchored at the ends — see bridge illustration.

What is a cable-braced bridge?

A cable-braced bridge was developed by German engineers at Cologne, Düsseldorf, and elsewhere in the 1950s and ’60s; in this form a single tower at the midpoint supports the roadway by means of a number of cables.

How does a suspension bridge carry loads?

These loads are transferred both to the towers, which carry them by vertical compression to the ground, and to the anchorages, which must resist the inward and sometimes vertical pull of the cables. The suspension bridge can be viewed as an upside-down arch in tension with only the towers in compression.