What is the default password for IBM IMM?

PASSW0RD
Note: The IMM is set initially with a user name of USERID and password of PASSW0RD (with a zero, not the letter O). You have read/write access. You must change this default password the first time you log on.

How do I change the password on my Lenovo IMM?

To change the password for the slot #1 position user, you can run the following command:

  1. IMM: /opt/lenovo/toolscenter/asu/asu64 set IMM. Password. 1 [new_password] –kcs.
  2. XCC: /opt/lenovo/lnvgy-utl-lxce-onecli/onecli config set IMM. Password. 1 [new_password]

What is Lenovo IMM?

Integrated Management Module. In older System x servers, the Integrated Management Module (IMM) consolidates the service processor functionality, Super I/O, video controller, and remote presence capabilities in a single chip on the server system board.

How do I access IBM IMM?

Logging on to the IMM web interface

  1. On a system that is connected to the server, open a web browser. In the Address or URL field, type the IP address or host name of the IMM to which you want to connect.
  2. On the Login page, type the user name and password.
  3. Click Log in to start the session.

How do I reset my IMM?

Start → run → cmd Type Telnet appending by your IBM IMM IP address or IMM name press enter. Enter user login (userID) and password. Now on next screen type resetsp and press enter to reboot IBM IMM as below screenshot.

How do I reset my IMM to factory settings?

To restore the IMM2 factory defaults, complete the following steps:

  1. Log in to the IMM2.
  2. Click the IMM Management tab; then, click IMM Reset to factory defaults….
  3. Click the OK button on the Confirm Reset to factory defaults window (as shown in the following illustration).

How do I reset my Lenovo BMC password?

Follow the steps below to regain BMC access:

  1. Reboot the system and enter the system setup with F1 key.
  2. Go to “Server Mgmt”.
  3. Go to “BMC User Settings”.
  4. Hit “Add User”.
  5. Define a name and password.

How do I reset an IBM IMM?

How do I connect to my IMM port?

In the Address Bar area of the browser window, type the default IMM port IP address: 172.31. 1.254 (or 192.168. 70.125 if the IMM is new), and then press Enter. In the Login window, enter USERID as the username and PASSW0RD (with a zero) as the password, and then click OK.

What is IMM in IBM server?

The Integrated Management Module (IMM) is a management module that is used for systems-management functions. On the back panel of each appliance type, the serial connector and Ethernet connectors can be managed by using the Integrated Management Module (IMM).

How do I delete IMM logs?

To clear the IMM system-event log, select System Event Logs > System Event Log > Clear System Event Log, then, press Enter twice.

How do I reset my IBM IMM?