What is the default metric for EIGRP?
What is the default metric for EIGRP?
Routing metric By default, only total delay and minimum bandwidth are considered when EIGRP is started on a router, but an administrator can enable or disable all the K values as needed to consider the other Vector metrics.
What is administrative distance of summary EIGRP?
By default, OSPF has a default administrative distance of 110 and RIP has a default administrative distance of 120….Cisco.
| Routing protocol | Administrative distance |
|---|---|
| EIGRP summary route | 5 |
| External BGP | 20 |
| Internal EIGRP | 90 |
| IGRP | 100 |
How do I redistribute a static route in EIGRP?
When a static route to a destination is available pointing to an interface, rather than a next hop address, it can be redistributed into EIGRP either by issuing the redistribute static command or configuring a network command for the network in the static route.
What is the default seed metric for routes redistributed into OSPF?
20
Specifically, router R2 redistributed EIGRP-learned routes into OSPF using OSPF’s seed metric of 20….Route Redistribution – Part 1.
| Routing Protocol | Default Seed Metric |
|---|---|
| OSPF | 20 (or 1 when redistributing BGP routes) |
| BGP | Uses the IGP metric value |
What is EIGRP composite metric?
If you have two EIGRP routes to the same place, the one with the lowest composite metric wins. So basically, a composite metric is a number calculated based on a number of different components that determines route preference.
What is the seed metric for EIGRP?
For EIGRP, the default seed metric is based on the interface bandwidth and delay. For RIP, the seed metric starts with a hop count of 0 and increases in increments as the prefixed is advertised from router to router. For OSPF, the seed metric is based on the interface’s bandwidth.
What is administrative distance vs metric?
The difference between administrative distance and metric is that AD is used to choose between multiple paths learned via different routing protocols. Metric, on the other hand, is used to choose between multiple paths learned with the same routing protocol.
What is metric in route table?
A metric is typically one of many fields in a routing table. Router metrics help the router choose the best route among multiple feasible routes to a destination. The route will go in the direction of the gateway with the lowest metric.
What is EIGRP stub connected summary?
A device that is configured as a stub with the EIGRP Stub command shares connected and summary routing information with all neighbor devices by default. The six following keywords are used to modify EIGRP routing behavior. Let’s check the different commands of EIGRP Stub routing.
What is redistribution of routing protocols?
The Quick Definition: Route redistribution is a process that allows a network to use a routing protocol to dynamically route traffic based on information learned from a different routing protocol. Route redistribution helps increase accessibility within networks.
What is seed metric in EIGRP?
What is the default metric used when redistributing OSPF into EIGRP?
The default metric-type for redistributed routes in OSPF is E2 which means that the metric remains the same throughout the OSPF network. If you had another router behind R3 running OSPF, you would still see the redistributed routes with a metric of 20.
