What is the architecture of 8051 microcontroller?

8051 microcontroller is designed by Intel in 1981. It is an 8-bit microcontroller. It is built with 40 pins DIP (dual inline package), 4kb of ROM storage and 128 bytes of RAM storage, 2 16-bit timers. It consists of are four parallel 8-bit ports, which are programmable as well as addressable as per the requirement.

What is 8051 microcontroller pin diagram?

8051 microcontroller is a 40 pin Dual Inline Package (DIP). These 40 pins serve different functions like read, write, I/O operations, interrupts etc. 8051 has four I/O ports wherein each port has 8 pins which can be configured as input or output depending upon the logic state of the pins.

What are the different blocks of Architecture of 8051 microcontroller?

The block diagram of the 8051 Microcontroller Architecture shows that 8051 Microcontroller consists of a CPU, RAM (SFRs and Data Memory), Flash (EEPROM), I/O Ports and control logic for communication between the peripherals.

How many pin the 8051 has?

8051 microcontrollers have 4 I/O ports each of 8-bit, which can be configured as input or output. Hence, total 32 input/output pins allow the microcontroller to be connected with the peripheral devices.

What is the architecture of microcontroller?

All MCs use one of two basic design models: Harvard Architecture and von-Neumann architecture. They represent two different ways of exchanging data between CPU and memory. MCs with Harvard architecture are called “RISC MCs”. MCs with von- Neumann’s architecture are called ‘CISC microcontrollers’.

How many pins are there in microcontroller?

A typical microcontroller can have between 6 and 60 pins on it, to which you’re expected to attach power connections, input and output connections, and communications connections. Every microcontroller has different configurations for its pins, and often one pin will have more than one function.

What are the architecture used in microcontroller?

What is a microcontroller architecture?

A microcontroller is essentially a small computer on a chip. Like any computer, it has memory, and can be programmed to do calculations, receive input, and generate output. Unlike a PC, it incorporates memory, a CPU, peripherals and I/O interfaces into a single chip.

What is the clock frequency of 8051?

12 MHz
The original Intel 8051 ran at 12 clock cycles per machine cycle, and most instructions executed in one or two machine cycles. A typical maximum clock frequency of 12 MHz meant these old 8051s could execute one million single-cycle instructions, or 500,000 two-cycle instructions, per second.

Is 8051 a RISC or CISC?

It is based on RISC Instruction set Architecture (ISA) and also called as Advanced RISC machine….Difference between 8051 and ARM :

S.No. 8051 ARM
5. It is based on CISC Instruction set Architecture. It is based on RISC Instruction Set Architecture.