What is sikadur 32 Hi Mod used for?

Grout horizontal cracks in structural concrete and wood by gravity feed. Machinery and ‘robotic’ base-plate grout. Structural adhesive for concrete, masonry, metal, wood, etc.

What is sikadur used for?

Sikadur®-31 DW is a 2-part epoxy based moisture tolerant, thixotropic, structural adhesive which bonds most construction materials. It has high mechanical strengths and can also be used for minor concrete repairs, joint filling and crack sealing. Temperature range +10 °C to +30 °C.

What is sikadur 52?

Sikadur 52 is a 2-component, 100% solids, moisture-tolerant, epoxy adhesive. It is a low-viscosity, high-strength adhesive formulated specifically for grouting both dry and damp cracks. It conforms to the current ASTM C-881, Types I and II, Grade-1, Class C and AASHTO M-235 specifications.

How do you mix sikadur 32?

To grout baseplates – Add up to 1 1/2 parts of oven- dried aggregate to 1 part of mixed Sikadur® 32, Hi-Mod, by volume. Place grout under baseplate. Avoid contact with the underside of the plate. A 1/4 to 3/8 in.

What is a concrete bonding agent?

Concrete bonding agents are natural or synthetic materials used to join the old and new concrete surfaces. This agent can also be used to join the successive concrete layers. This chemical helps to allow different concrete surfaces to behave like a single unit.

How do you use Sika Armatec 110?

Apply using a stiff-bristle brush or broom. To achieve good bond, Sika® Armatec®-110 EpoCem must be applied well into the substrate, filling all pores and ensure complete coverage of all surface irregularities (minimum layer thickness 1/64″ (0.5 mm). Spray apply with Goldblatt Pattern Pistol or equal equipment.

Is sikaflex an epoxy?

Epoxy adhesive Sikaflex®-298.

What is epoxy paint for steel?

Epoxy Paints is a two part coatings that was developed to provide solution on metal substrates due to its high adhesion on various substrates. The system generally uses 3:1 by volume mixing ratio, and dry overnight providing a tough, protective coating with extremely excellent hardness.

Is it necessary to use bonding agent for concrete?

Concrete does not adhere to: Concrete – Dried concrete doesn’t have any natural bonding agents, so in order to get wet concrete to bond to existing concrete, a bonding agent will need to be used.