What is Quantum Card Reader?

Quantum Card Reader All In One Card Reader Transfer files between your computer and digital devices. Plug and Play for PC platform. LED power/status indicators.

What is a SD MMC card reader?

A memory card reader is a device for accessing the data on a memory card such as a CompactFlash (CF), Secure Digital (SD) or MultiMediaCard (MMC). Most card readers also offer write capability, and together with the card, this can function as a pen drive.

What is a 3 in 1 card reader?

This Card Reader is not only a microSD(HC) card reader, but also SD(HC) memory card adapter. This adapter converts your micro SD(HC) memory cards to a SD card so you can use it in your camera, tablet or other devices that support SD. You can also connect it directly to your computer as a USB flash drive.

What is a Microcard reader?

Small enough to tie onto your mobile handset or carry on your key-chain. Card Reader can be used as a USB Flash Drive if you keep your microSD/microSDHC card installed in the device. Perfect mobile accessory. Compatible with microSD, microSDHC and microSDXC cards.

How do I enable the card reader on my laptop?

Look for the card reader under Devices with removable storage….SOLUTION 2 – Verify the reader’s status under Device Manager.

  1. STEP 1 – Connect the reader to the PC.
  2. STEP 2 – Check under Device Manager.
  3. STEP 3 – Refresh the drivers.
  4. STEP 4 – Verify if the reader is detected.

What is the difference between an SD card and an MMC card?

MultiMediaCard (MMC) is a flash memory card standard. Typically, an MMC is used as storage media for a portable device, in a form that can easily be removed for access by a PC. Secure Digital (SD) is a flash (non-volatile) memory card format and is used for storage.

How do I get my PC to read my SD card?

Put the SD card in the card reader and plug it to appropriate port on your laptop. Then open File Explorer (Windows key + E) and go to This PC. In right pane, you should have your SD card listed. Double click on it to browse or access the content on your SD card.

How do you use a card reader?

How to use a card reader

  1. Insert your card into the reader making sure the card number matches the one shown on Online Banking.
  2. On the card reader, when asked to ‘Select Function’, press the button with the up and down arrows.
  3. When prompted, enter your card’s PIN and press the ‘OK’ button.