What is mid-side processing?

What is mid-side processing?

Mid/side processing takes a left/right stereo signal and breaks it up into two separate layers: Mid and Side. Mid/side processing is a highly effective way of making adjustments to the spacialization of a mix or master to make your mix sound full and wide.

What should be in mid or side EQ?

Mid-Side (M/S) EQ is an equalizer process that encodes a stereo signal into separate mono and stereo channels. The mid (mono) channel contains information identical in both the left and right channels. The sum of the left and right channels create a mono signal (L+R=Mid).

How do you EQ the midrange?

6 Strategies for Taming Midrange in a Busy Mix

1. Article Content.
2. Identify the Most Important Elements.
3. EQ Cuts to Improve Clarity & Headroom.
4. Carve out Space for Lead Instruments.
5. More Control With Multiband Compression.
6. Increase Separation with Mid/Side Processing.
7. Use Sidechain Compression.
8. Conclusion.

Is Mid-Side EQ necessary?

Mid/side EQs are great for adding depth, space, and width to your tracks. To make a mix sound wider, start by rolling-off the lows in the middle channel. Be careful not to cut too much or your mix may start to sound thin. Depending on the track, you may want to cut up to 40 or 60 Hz.

How do you mix mids?

When mixing your mid-range, try using some saturation on the mids using frequency-specific saturation – additionally, utilize upward compression to that same range. If your mix can benefit some aggressive mids, try an aggressive bus that isolates the mids, compresses, distorts, and upward compresses.

What does midrange sound like?

Midrange covers the audible spectrum from 250 to 4,000 Hz, and includes instruments such as the guitar (275 Hz), flute (800 Hz) and piano (2,000 Hz). Finally, any treble sound falls between 4,000 and 20,000 Hz, but musical instruments typically can’t surpass 12,000 Hz.

How do you make clearer mix?

10 Mixing tips and tricks to create a clear mix

1. Bass your worse enemy.
2. Use Reverb as delay.
3. Side chain compress the import parts that need it.
4. Parallel compress your drums.
5. avoid the stereo imager in the mix use mid side routing instead.
6. phase / delay to create space.
7. notch filter to create space.

Why is mid side EQ important?

Mid/side EQ allows you to isolate different frequency ranges at the center or sides of your mix. Mid/side EQ can be a powerful tool for removing muddiness by focusing the low-end in the center of the mix, freeing up space on the sides.

What does too much midrange sound like?

Too much midrange energy in your mix can make it sound too hard, too boxy, too loud or too edgy. Too little can make it sound dull, scooped or soft. Getting the mids right is critical to your mix, and midrange issues cannot always be fixed at the mastering stage.

What is mid side compression?

Mid/side compression is a technique used by many pro engineers for increased flexibility when processing stereo material. By encoding a stereo signal from L/R to M/S, it’s possible to compress the mono (mid) and stereo (side) elements of the signal independently.