What is login local command?
What is login local command?
Login local command is used to ensure the secure remote login by telnet and it is also used to store the information about that remote users in the database. While creating the users with previlage with login local command the TACACS or RADIUS protocol is used for authentication and accouting purpose.
What is login local in switch?
Login Local means you need a username and a password to get to the console session.
What is login command in cisco?
Login command is used in VTY for password that is specified to be checked at login. If you do not use login command you will not able to use the specified password for the vty to login. Login can also be used with login local. In which you can config a username and password on the router to be auth.
What is the difference between the login and login local commands?
Login Local requires a username and password while Login just needs the password.
Why is the login command required?
The login command validates the user’s account, ensuring authentication, logins enabled properly, and correct capacity for the port that is used for the login. The login command verifies the user’s identity by using the system defined authentication methods for each user.
What is the default username for Cisco switch?
admin
Most routers and switches by Cisco have default passwords of admin or cisco, and default IP addresses of 192.168. 1.1 or 192.168. 1.254.
What is AAA local authentication?
The authentication, authorization, and accounting (AAA) network security services provide the primary framework through which you can set up access control on your router or access server. Authentication is a way of identifying a user before permitting access to the network and network services.
How do I login to command line?
Logging into a Device via CLI
- Register the Telnet and SSH protocols to the Windows registry. Note: This step is only required for first-time users on Windows.
- On a NetBrain map, right-click the target device and then select Tenet/SSH CLI.
- 3.At the CLI, enter the required username and password. ▪
What is the need for login command?
What is the default Cisco username and password?
3. When the login page opens, enter the username and password. The default username is cisco. The default password is cisco.
How do I access the GUI on a Cisco business switch?
To access the GUI, you need to know the IP address of the switch. To keep it simple, proceed with one of the following options: If your Cisco Business switch is new, the default IP address is 192.168.1.254.
What is the default IP address of a Cisco switch?
To keep it simple, proceed with one of the following options: If your Cisco Business switch is new, the default IP address is 192.168.1.254. If you can’t remember the IP address or you don’t have a special configuration, use an open paperclip to press the reset button on your switch for at least 10 seconds while it is powered on.
What is the current configuration of Cisco logging synchronous login?
Current configuration : 1460 bytes control-plane line con 0 exec-timeout 15 50 privilege level 15 password cisco logging synchronous login If a password is not set before using login, a message is displayed notifying that a password needs to be set before login becomes active.
How do I access the CLI of a managed switch?
If you want to access the CLI of a switch that is already on a network, check out Access the CLI via PuTTY using a Console Connection on 300 and 500 Series Managed Switches. When doing these configurations, you should not be connected to a Virtual Private Network (VPN) or the Internet.
