What is Jolly Gel flocculent?
What is Jolly Gel flocculent?
Jolly Gel Swimming Pool Flocculent – jolly gel flocculant has been proven to work with sand and zeolitic filter media, Jolly Gel removes algae spores and reduces chlorine consumption. Placed in the pump or strainer basket it dissolves to place a porous membrane screen over the filter media, removing fine particles.
How do you use Jolly gel?
To use just place a cube in the pump or strainer basket. The Jolly gel slowly dissolves as the water passes over it on its journey to the filter. The Jolly gel places a porous, clear membrane screen over the filter media, and penetrates the bed to an average depth of some 15cm (6”).
What is jolly gel for pools?
Jolly Gel helps to remove phosphates and minute debris particles from swimming pool water and transforms the water clarity in just a few hours. Jolly Gel is Europe’s number one swimming pool flocculent for private swimming pools.
Will flocculant clear a pool?
In many cloudy water situations, pool flocculant is an effective option for clearing up your pool: Pool flocculant works quickly. Unlike clarifier, you won’t have to wait days for flocculant to do its job. The particles quickly coagulate together and sink to your pool floor in a matter of hours.
What does Pool Gel do?
In particular, it helps remove phosphates (or algae food) from the pool and less food equals less algae and thus, less chlorine needed. The chemistry is simple: Green algae strips carbon dioxide from the water as it grows, which in turn raises the pH level.
Why is my pool still cloudy after flocking?
If all the chemicals are balanced, but water is still cloudy, there might be fine particles inside the pool, and you need to use a clarifier or pool flocculant and then vacuum up the pool. If all do not work, try backwashing your filter since it might be clogged.
Can you put too much flocculant in pool?
But if you add too much, the flocculant will start to agglomerate with itself instead of those particles. These flocculant clumps will not drop to the pool floor and can clog up your filter. Too much of this product can also cause damage to your pool’s surface and may even injure your skin.
How do you use pool gel?
How to use Jolly Gel
- Place the cube in the pump strainer basket not in the skimmer. Run the pump for 24 hours.
- The cube will slowly dissolve as the water pases over it.
- Jolly Gel places a porous, clear glutinous membrane screen over the filter media, and penetrates the bed to an average depth of approx.
How do you use Aqua Pro Gel Cube?
HOW TO USE
- Ensure chlorine and pH levels are correct.
- Place one cube into the sock and then into the Skimmer Basket.
- In leafy areas, place cube below skimmer sock.
- 24 hours after adding AQUA PRO Cel Cube, backwash filter twice.
- Replenish with a fresh cube as required to maintain your pool water in sparkling condition.
How long should flocculant sit?
8 hours
Step by Step use of Flocculant Read instructions on your package of flocculant. You’ll have to add the correct amount according to the volume of your pool. Once added, run the pool pump for two hours to properly circulate it and evenly distribute it. Turn off the pump and leave the pool water to sit for 8 hours.
How do you vacuum a pool after floc?
You can even vacuum twice to be sure to catch everything. Usually while vacuuming to ‘Waste’, you can run the garden hose into the pool to keep the water level the same. But when vacuuming after floccing, we recommend topping the water up afterwards, as the inflow of water will also disturb the debris at the bottom.
