What is IP address for D-Link router?

192.168.0.1
IP address of the router, default is 192.168. 0.1. Subnet Mask of the router, default is 255.255.

What is the default password for D-Link N300?

SETUP AND CONFIGURATION PROBLEMS – Open a web browser and enter the address ‘http://192.168.0.1’. – The default username and password is ‘admin’.

How do I log into my D-Link router?

Step 1: Open your web browser and type in http://dlinkrouter.local. or type in the IP address of the router (default – http://192.168.0.1). Step 2: Enter or select the username (admin) and enter your password (blank by default), and then click OK or Log In. The password is case-sensitive.

How do I reset my Dlink N300 router?

How do I reset my router to factory default settings?

  1. Step 1: With the router on, insert the end of a paper clip into the pinhole highlighted below.
  2. Step 2: Hold the paper clip down for 10 seconds and release.
  3. Step 3: The unit will reboot automatically. Once the WLAN light stops blinking, the unit has been reset.
  4. Note:

How do I connect my N300 wireless adsl2+ modem?

In the address field of your Internet browser, type http://www.routerlogin.com. To connect, you can also enter the modem router’s IP address, http://10.0.0.2. The wireless modem router user name and password are not the same as any other user name or password you might use to log in to your Internet connection.

How do I find my D-Link IP address?

Press the Windows key and R together. Type cmd in the box and click OK. At the prompt, type ipconfig and press Enter. This will display the IP address, subnet mask, and default gateway of your adapter.

How do I reset my D-Link Wireless N300 ADSL2+ modem?

⮚ Use a sharp object to press and push down the factory reset button on D-link wireless N300 ADSL2+ modem router. ⮚ Keep holding the reset button for almost 10 seconds. ⮚ Release it when the LED lights on the dlink router start to blink. ⮚ This completes the factory reset of the dlink router.