What is F1 and F2 on a motor?

F1, as you can imagine, is the highest pinnacle of motor racing but the other divisions have a lot of importance as well. F1 v F2: The FIA Formula 2 championship, or F2 is unofficially recognized as the feeder series to F1.

What is V1 mounting of motor?

Simply from the appearance of the motor, V1 and B5 installation motors are flanged but not grounded, but their internal structure and installation are different: Shaft extension direction: V1 motor shaft extends downward, B5 motor shaft extends horizontally.

What is B14 mounting?

The electric motor in our example has mounting ”B14”; this is an inner flange. This design can be identified by the threaded holes in the face of the motor. For a “B5” design, the diameter of the flange exceeds the diameter of the motor, and the boltholes are unthreaded.

What is B5 mounting in motor?

B5 – flange (‘D’ flange) The flange diameter is bigger than the motor frame diameter. The holes are not tapped. B5 flanges are available for all motor sizes. B14A – flange (‘C’ face)

What terminals that represent F1 and F2 in a DC motor connections?

DC motor terminal leads are labeled for easy identification in the motor’s terminal box. For example, leads labeled “A1” and “A2” are connected to the armature through the motor’s brushes; leads labeled “S1” and “S2” are the ends of the series field; and leads labeled “F1” and “F2” are the ends of the shunt field.

What is the difference F1 and F2?

While in F1, every team has their own car models and manufacturers, including tech that they have developed themselves to have a better shot at winning the event, in F2, all drivers have to use a car designed by Williams F1. All cars are ditto, and all drivers are catered to by the same race engineers.

What is B3 mounting in motor?

The standard IEC mounting position places the junction box on the top of the motor, known as the IM B3 mounting position in IEC frame (or F3 in NEMA frames).

How are motors mounted?

Motor mounts can also be called engine mounts. Each motor mount is connected in two places: to the car body and to the engine itself. Motor mounts are typically made of rubber or similar materials to prevent metal-to-metal contact between the car body and the engine itself.

What is motor PCD?

What does PCD mean? The Pitch Circle Diameter (PCD) is the diameter of the circle which passes through the centre of all the studs, wheel bolts or wheel rim holes.

What is C face motor?

C-Face Design: Having a flat surface machined onto one side allows for direct-coupling with equipment while the weight of the motor is cantilevered with the help of a heavy duty flange. Of course, this method is not useful for large motors and is rare in HP ranges over 20HP.

Why does my DC motor have 3 wires?

The three wires give the brushless motors more pulling power. Understanding this helps understand stepper motors below. The two wires of the brushed dc motor can be thought of as forward and reverse. The three wires of brushless can be thought of as 1, 2 and 3.