What is considered a high bay light?
What is considered a high bay light?
High bay lights are used to light up spaces whose ceilings are higher than 20ft from the floor and around 40ft. Also, for these lights to operate efficiently from this height, they need specially engineered reflectors in the case of HPS / MH bulbs and lens angles in the case of LED high bays.
How do I choose an LED high bay light?
Wattage and lumens – How to choose the correct amount
- 10-15 feet – This height is ideal for lights with 10,000 to 15,000 lumens.
- 15-20 feet – This height is ideal for lights with 16,000 to 20,000 lumens.
- 25-35 feet – For this height, lights with 33,000 lumens are ideal.
How far apart should high bay lights be?
2.High bay lighting spacing At a height of 15 feet, a space of about 12 feet of bright lighting is sufficient. However, approximately 15 feet of space will ensure normal lighting. At a height of 20 feet, a distance of 18 feet is normal light, and a distance of 15 feet produces a bright light.
How do you size high bay lights?
Use 100 watts High Bay lights and space them out every 8-14 feet (8 for high brightness, 14 for adequate). A 6×3 pattern for example is 18 lights for basic lighting, or go 7×3 (or 6×4/8×3 depending on wiring) for 21-24 lights to get a medium brightness level. 8×4 for 32 would be very high brightness.
How many lumens do I need high bay?
What wattage LED high bays should I get?
| Ceiling Height | Use a fixture rated |
|---|---|
| Over 40 feet | 40,000 lumens & up |
| 30 to 40 feet | 30,000 to 39,000 lumens |
| 20 to 30 feet | 20,000 to 29,000 lumens |
| 15 to 20 feet | 15,000 to 19,000 lumens |
How long do high bay lights Last?
between 25,000 and 50,000 hours
Many low-cost LED High Bay fixtures are equipped with drivers that will only last between 25,000 and 50,000 hours at an ambient temperature of 25°C and in many cases MUCH less at realistic elevated temperatures.
How many high bay lights can you have on a 20 amp circuit?
Amount of Lights You Can Put on a 20-Amp Circuit Breaker A standard 50-watt light consumes less than a half amperage on a 120-Volt circuit. With that fact, a 50-watt light on a 20-amp breaker can have a total of 38 lights on a circuit.
Can you use high bay lights in a garage?
The biggest reason not to use high-bay lights in your garage is that they’re going to cast shadows where you don’t want them. Keep in mind that these lights were designed to be used in warehouses. In a warehouse, you want powerful light focused on the floor.
Do I need high bay lights?
Do I need a high bay light fixture? The general answer to this question depends on the height of the ceiling itself. Since most high bay fixtures are mounted or installed higher up, the ceiling is really the only deciding factor. Any ceiling at a height of 20 feet or more from the floor requires high bay fixtures.
Do LED high bay lights get hot?
Therefore, many customers think that LED high bay lights will not be as hot as incandescent lamps. In fact, this is wrong. LED high bay lights still generate heat. When electricity is converted into light energy, it is partially converted into heat energy, thus generating heat.
How many LED lights can you put on one switch?
The load of the lights determines how many you can have. A regular 15A circuit can have up to 1400W of lights connected, or one 1400W light or 14 100W light bulbs. Most homes allow for 23 to 40 60-watt bulbs or 280 to 480 5-watt LEDs.
