What is brass CZ121?

CZ121 Brass is an alpha/beta alloy that is very well suited for machining. This improved machining is due to lead that had been added to the Brasses composition. The added lead is insoluble in the Brasses’ microstructure so the soft particles act as chip breakers.

What is brass CW614N?

CZ121 / CW614N is an alpha/beta alloy. Brass alloy CZ121 / CW614N is used for machining. It has Lead added to the composition to improve machinability. The Lead remains insoluble in the microstructure of the brass and the soft particles act as chip breakers.

Is 319 brass a specification?

IS 319/320 Brass Free Cutting Grade 1 / 2 is the standard grade for Free Machining Brass….Element.

Element Value
Yield Stress 150 MPa Min.
Tensile Strength 380 MPa Min.
Hardness Brinell 90 to 160 HB
Elongation 18 Min.

What is the naval brass?

Naval brass is the classic marine, high-strength and corrosion-resistant alloy containing 60 percent copper, . 75 percent tin and 39.2 percent zinc. It is widely used in marine construction where strong, corrosive-resistant and hard material is required and is suitable for both salt and fresh water applications.

What is brass CZ108?

Classified predominantly as an alpha brass, CZ108 is a popular material grade due to its hot and cold working properties. It is a high purity cold forming brass and finds applications where severe bending properties are required. The material can be machined but only at slow speed with very light feeds.

Is 319 a gr1?

IS 319 Gr I, Free cutting brass, is a significantly improved form of 60/40 brass, with excellent free cutting properties. It is used in the mass production of brass components where maximum output and longest tool life are required, and where no further cold forming after machining is required.