What is ATS on a generator?

An automatic transfer switch (ATS) is a self-acting, intelligent power switching device governed by dedicated control logic.

Can you use an ATS with portable generator?

Manual and automatic transfer switches can work with any type of generator. Generally, if you have a portable, towable, or PTO generator, you will select a manual transfer switch. Standby models, such as our PSS or diesel units, you will use an automatic transfer switch.

What is a standard transition transfer switch?

Transfer switches are used for quickly and safely transitioning all electrical power consumed by the circuit, equipment, or systems connected to the transfer switch output between those normal and emergency power sources.

What is the smallest diesel generator available?

Ultra micro 3.5 kW Kubota powered generator is one of the lightest, most reliable, and fuel-efficient generators in its class. Designed for trucks, RVs, trailers, and industrial applications.

How do you size an ATS?

It is recommended that the current rating for ATS match that of the main breaker in the electrical control panel. For example, if you have a 100-amp main breaker, you will need a 100-amp ATS.

How does a Generac ATS work?

Generac’s Automatic Transfer Switches make power management simple by automatically redirecting power from the generator to your household during an outage. These transfer switches distribute power from your home standby generator without the need for user interaction.

Do you need an ATS with a generator?

Don’t Forget. An automatic transfer switch is essential if you’re buying a home standby generator. To install your generator, you need to buy both at the same time.

Do you need a transfer switch for a portable generator?

Is a Transfer Switch Required? If your generator is above 5,000 watts, you will always need a transfer switch for safety reasons and ease of use. This is important to remember, as the level of power being produced requires the use of a regulator to help keep surges and backfeeding the grid from happening.

How does an ATS start a generator?

When the generator detects a mains failure, it will send a signal to the ATS to disconnect from the mains and start automatically. Once the generator has started, it will send a signal to the generator to start. When it receives this, the ATS will switch to the generator supply.