What gauge is a labret stud?
What gauge is a labret stud?
16 gauge
Most labret posts are 1.2mm (16 gauge) which is the same thickness as a standard piercing stud.
What size is a labret bar?
Standard lengths for labrets are 1/4″ or 5/16″. The 3/16″ is generally used for cartilage piercings rather than lip piercings for a nice, snug fit.
What is a labret gauge?
A labret, Monroe or philtrum piercing is often done with a 16 gauge or 14 gauge. Standard length for a labret piercing is 5/16”, 3/8”, or 7/16”.
How long should a labret stud be?
Labret usually refers to a piercing that is below the bottom lip, above the chin. The most common gauges for a labret piercing are 16ga or 14ga. The thickness of your lips should determine the length of your labret. The most common length is 3/8 inch but 5/16 inch and 7/16 inch are common as well.
What size gauge is a lip piercing?
Most lip piercings are done with either 14g or 16g piercing needles. These aren’t the only lip piercing sizes, though. Some people opt to be pierced at a heavier gauge initially, while others stretch their lip piercings to larger sizes later.
What is the normal gauge size for a lip piercing?
Standard piercing sizes
| Piercing | Standard Gauge | Standard Length |
|---|---|---|
| Labret Lip Rings | 14G or 16G | 1/4″ , 5/16″, and 3/8″ |
| Monroe Piercing | 16G | 1/4″ , 5/16″ and 3/8″ |
| Nipple Piercing | 14G | 3/8″ , 1/2″ |
| Tragus / Helix / Rook / Conch / Daith | 16G , 18G | 3/16″, 1/4″ , 5/16″ and 3/8″ |
What gauge is snake bites?
14 Gauge-16 Gauge
Snake Bite Piercing Process: Snake bite piercings are normally performed with a 14 Gauge-16 Gauge hollow piercing needle.
How do I know what size labret to buy?
To measure a labret you simply have to measure the barbell length excluding the platform base and screw head if there is one. For labret piercing, ring size vary between 8mm(0,31in) and 11mm(0,43in). 8mm(0,31in) and 9mm (0,35in) tend to be the most common sizes for this piercing.
What gauge do you pierce your labret with?
The labret is usually pierced with a flat back barbell because a ring would need to be very large to accommodate for swelling, especially because it is in the middle of the lip. The labret is usually pierced with a 16 gauge or a 14 gauge, but it can be done in an 18 gauge for some individuals.
Is 18 gauge thicker than 16 in piercing?
“Here [in the U.S.] it’s measured by gauge.” Gauge sizes work in reverse, meaning that the higher the number, the thinner the width. So higher numbers (like 16 gauge) are thinner than smaller numbers (like a 6 gauge). When discussing gauges, references to a “larger gauge” means bigger around, not a bigger number.
How do I know what gauge my piercing is?
You can use the following methods to measure the gauge of your piercing jewellery:
- BCR: Measure the width of the bar.
- Labret: Measure the width of the bar.
- Barbell: Measure the width of the bar.
- Septum Ring: Measure the width of the ring at its thickest section.
