What does E11 mean on a candy washer dryer?

An E11 error code indicates there’s an open circuit on the dryer heater or a module issue. It’s a good idea to check the wiring from the sensor on the top the drum to the circuit board as this can become damaged during the spin cycle.

How do you fix an E11 error on a washing machine?

Resolution

  1. Check the water supply to ensure that the water pressure is proper.
  2. Clean the filter in the inlet hose next to the tap.
  3. Ensure the correct position of the drain hose.
  4. Ensure correct drain height.
  5. Clean the pump and filter.
  6. Check the drainage hose / inlet hose for possible kink or twist.

What does E11 mean on a tumble dryer?

An E11 error code on a Hoover washing machine will indicate that you have a fault with the drying sensor. If the drying sensor is damaged or faulty then you will find yourself with a washer dryer with won’t dry your clothes after they have been washed.

What does E11 mean on a Bosch washing machine?

The e11 error code of the Bosch washing machine has occurred due to the AquaStop and Leakage protection system activation. AquaStop and Leakage protection system are necessary to shut off water and turn off the device. It’s vital in cases of a rupture of a fill hose or leakage inside the washing machine.

How do I reset my candy washer?

Solutions

  1. First, you should perform a general reset of the machine. Turn the machine off at the powerpoint, wait for one minute, and then turn it back on.
  2. If you see no change, you can try a Master Reset. This will reset all of the onboard componentry and is often successfully used by appliance technicians.

How do I reset the E11 code on my Electrolux washer?

With this washer, the first thing you do is check your water tap.

  1. Checking the Water Tap.
  2. Check Your Drain Hose.
  3. Clean the Water Valve Filter.
  4. Clean the Pump and Its filter.
  5. Check for Drain Blockage.
  6. Check Air Tube for Blockage.
  7. Use Less Detergent.
  8. Easy Way to Check the Pressure Sensor.

What does E11 mean on Beko washing machine?

E11. This code means the washing machine as detected a problem with the motor, due to its complexity this is something a technician will need to examine for you.

How do I fix e 11 error on Samsung microwave?

What is the solution to the e11 error on my Samsung microwave?

  1. Identifying and correcting the error code.
  2. The device should be unplugged from the power source.
  3. To remove the top panel, unscrew the fasteners that are holding it in place.
  4. Locate the humidity sensor on your device.

How do I fix E011?

E011 — Long pressing of one of the buttons For this, the control panel needs to be cleaned of the dirt and the moisture. Generally, you can do this on your own by getting help from your user manual or call the appliance repair experts for a service.

https://www.youtube.com/watch?v=TsiUHMxaeCQ