What does code E52 mean?

If you’re wondering what the E52 error code, in particular, means, you’ve come to the right place. A Frigidaire washer showing you the E52 error code means that it’s getting a bad signal from its tachogenerator. Also known as the tachometer generator, this component is designed to sense the motor’s speed.

How do you reset a Frigidaire Affinity washer?

You can easily reset your Frigidaire washer.

  1. Press the “Cancel” button on the washer’s display.
  2. Turn the knob or push the button to select a new cycle.
  3. Press “Start.” You have now reset your Frigidaire washer.

How do I troubleshoot my Frigidaire Affinity washer?

How to Troubleshoot a Frigidaire Affinity Washer

  1. Stop the washing machine if rattling or clanking sounds occur.
  2. Redistribute the load if you hear a thumping sound.
  3. Level the washer if the machine vibrates.
  4. Plug the power cord in and check household fuses or breakers.
  5. Turn the water supply faucets on completely.

How do I clear e52 32 on DSTV?

Reset your DTH box by switching the power off at the socket, then pull the power cord out from the back of the box. Leave the power disconnected for at least 30 seconds. If possible, unscrew both ends of the cable, blow out any dust that may have built up and screw it back in.

Why is my Frigidaire Affinity washer not starting?

If the electrical outlet is receiving power, but the washer won’t start, the power cord might be defective. However, this is very rare. To determine if the power cord is defective, use a multimeter to test it for the cord for power. If the power cord is not getting power, replace it.

Why is my Frigidaire washer not spinning?

Common solutions for: Frigidaire Washer won’t spin or agitate. Inspect the drive belt to determine if it is broken or if it is loose on the pulleys. If the drive belt is broken or loose, replace it. The motor coupling connects the motor to the washer transmission.

How do you read the error code on a Frigidaire Affinity washer?

the failure code will appear in the display as an E followed by two numbers, a number and a letter or two letters….How to retrieve the error codes in a Frigidaire Affinity front…

  1. Wake the washer by pressing any button.
  2. Wait 5 seconds.
  3. Press and HOLD the Start/Pause and Cancel buttons simultaneously.

Why is my washing machine not spinning or draining?

If your washer won’t drain or spin, the water level control may be faulty. Open the machine’s control panel and look for a plastic tube attached to the water level valve. If it’s clogged, clear it out with vinegar. If the valve itself is corroded, it may need to be replaced.

How do I fix E52 32 searching signal?

  1. SOLUTION 1: CLEAR THE CLUTTER. The satellite dish on your roof needs a clear line of sight to the sky to receive the signal.
  2. SOLUTION 2: REPOSITION OR CHECK THE POSITION. If the satellite dish has been moved because of construction, can also lead to loss of signal.
  3. SOLUTION 3: RECHECK OR VERIFY.