What does 5 beeps mean on startup?

Processor Failure
5 Beeps – Processor Failure.

Why is my Alienware beeping?

2 or 4 Beeps after upgrading or replacing the system memory. If a non certified memory module is installed on an Alienware 13 R2, 15 R2 or 17 R3 you may get 2 or 4 beeps when starting the system. This is a limitation set by the system BIOS.

What does 5 beeps mean Dell laptop?

Real Time Clock Power Failure
Five beeps, usually mean there is Real Time Clock Power Failure, which mean that your notebook has a problem with CMOS battery. CMOS battery is located inside computers and notebooks and stores information about real time clock (RTC).

Why is my PC beeping 5 times?

Insyde beep codes. Macintosh startup tones. Phoenix BIOS beep codes. Motherboard help and support….Dell beep codes.

Beep Code Description
4 beeps Memory (RAM) failure.
5 beeps CMOS battery failure.
6 beeps Video card failure.
7 beeps Bad processor (CPU).

What are 5 beeps on computer?

5 Beeps – Processor FailureTroubleshoot CPU, motherboard. 6 Beeps – Keyboard Controller FailureTroubleshoot keyboard, motherboard. 7 Beeps – Virtual Mode Exception ErrorTroubleshoot CPU, motherboard. 8 Beeps – Display Memory FailureTrouleshoot graphics card, motherboard.

Why does my PC beep 5 times when I turn it on?

5 short beeps is a processor error – the CPU has failed.

Why is my Alienware beeping and not turning on?

There are a number of reasons for a beeping noise. It could be a motherboard problem, RAM failure, CMOS battery issues, video card or chip problems, or CPU or LCD display issues.

How do I clear my CMOS X51 Alienware?

Clearing CMOS Settings

  1. Lay the system on the right side.
  2. Remove the stability foot.
  3. Remove the left and right side-panels.
  4. Locate the CMOS jumper (RTC_CLR1) on the system board.
  5. Remove the jumper plug from pins 2 and 3.
  6. Fix it on pins 1 and 2.
  7. Wait for approximately five seconds to clear the CMOS setting.

How do I stop my Dell laptop from beeping at 5?

To disable PC Card beep tones, perform the following:

  1. Click the Start button, point to Settings, and then click Control Panel. The Control Panel window appears.
  2. Double-click the PC Card (PCMCIA) icon.
  3. Click the Global Settings tab.
  4. Place a check mark next to Disable PC card sound effects.
  5. Click Apply and click OK.