What building codes does North Carolina use?

North Carolina Building Codes

  • 2018 North Carolina Building Code.
  • 2018 North Carolina Residential Code.
  • 2018 North Carolina Existing Building Code.
  • 2018 North Carolina Fire Prevention Code.
  • 2018 North Carolina Plumbing Code.
  • 2018 North Carolina Mechanical Code.
  • 2018 North Carolina Fuel Gas Code.

Do you need a building permit for a shed in NC?

According to the North Carolina Residential Building Code, permits are required for accessory structures (sheds) with any dimension that exceeds 12′. These are the responsibility of the homeowner and can be obtained through your local city or county zoning and/or building inspections department.

Who enforces building codes in NC?

– The Bureau of Boiler Inspection of the Department of Labor shall have general supervision of the administration and enforcement of those sections of the North Carolina State Building Code which pertain to boilers of the types enumerated in Article 7 of Chapter 95 of the General Statutes.

Can a homeowner pull a permit in NC?

Generally, the North Carolina General Statutes require that construction work be performed by an appropriately State licensed contractor who is responsible for obtaining the permit. For zoning permits, either the landowner or the person responsible for the work can obtain the permit.

How close to property line can I build a shed in NC?

How far from the property line? Typically, your accessory structure must to be at least 3 feet from side and rear property lines. Any accessory structures over 15 feet tall must be at least 10 feet from property lines.

How much does a building permit cost in NC?

Building Permit Fee: Square Footage up to 1500 sq. ft.: $240 Basic Fee. Square Footage over 1500 sq. ft.: Multiply by $0.20 + $240.00 (Basic Fee) North Carolina Licensed General Contractors add $10.00 Homeowner Recovery Fund.

Who regulates building regulations?

A local authority has a general duty to enforce the building regulations in its area and will seek to do so by informal means wherever possible. If informal enforcement does not achieve compliance with the regulations the local authority has two formal enforcement powers which it may use in appropriate cases.

What does NCAC stand for North Carolina?

the North Carolina Administrative Code
The North Carolina Administrative Code (NCAC) is a compilation of the administrative rules of approximately 26 state agencies and 50+ occupational licensing boards. Compilation and publication of the NCAC is mandated by G.S. 150B-21.18.