What are the specifications of a lift?

Specifications for lift design

  • Lift Car Capacity: 21 – 24 passengers.
  • Lift entrances: 1100 – 1200 mm wide with 2pc doors.
  • Door Closing Time: 3.1 seconds for 1100 mm doors / 3.4 seconds for 1200 mm doors.
  • Door Open Time: 1.4 seconds to 800 mm open.
  • Passenger Transfer Time: 1.6 – 2 seconds in and out.

What are the minimum dimensions for a lift?

Minimum Elevator Size The depth of the car must be at least 51 inches, and the width must be at least 68 inches, unless the elevator has center-opening doors, in which case at least 80 inches are required.

How often should a lift be serviced UK?

every six months
Scheduled and Unscheduled Passenger Lift Maintenance Such routines ought to be undertaken every six months. Lifts may similarly be subject to unscheduled repair and maintenance. More often than less, this results from undetected irregularities, which cause breakdowns.

What is the standard height of a lift?

How Tall Are a Standard Elevator and Elevator Door? A standard elevator door is between 6 and 8 feet tall, with the overall elevator height falling somewhere in that range.

Is standard for lift?

For home lifts, recommended Indian Standards are IS 14665 and IS 15259. If it is a machine room less elevator then IS 15785, similarly IS 14671 if it is a hydraulic lift.

What is CSI division14?

Material and product manufacturers relating to Conveying Equipment are organized by the product or the material into CSI sections.

How wide is a lift?

Most elevators are usually 6.5 to 7 feet wide and 6 feet deep.

What is car lift depth?

The width of the elevator car is a minimum of 68 inches (1730 mm). The depth of the elevator car measured from the back wall to the elevator door is a minimum of 54 inches (1370 mm). The depth of the elevator car measured from the back wall to the control panel is a minimum of 51 inches (1291 mm).

What en81 28?

The standard EN 81-28 (Remote alarm on passenger and goods passenger lifts) was published back in 2003, even though lifts complying with Directive 95/16/EC had to be equipped with the two-way communication device already from 1st July 1999 following the entry into force of that European standard.

What en81 20?

EN 81-20 and EN 81-50 are the new European Standards for lift design and manufacture issued by the British Standards Institution (BSI) and released in August 2014. The new standards apply to both passenger and goods passenger lifts and are set to have a major impact on the entire building and construction industry.

Is code for lift design?

It is recommended to use IS-compliant lifts and escalators for the safety of equipment and the passengers in States where a Lift Act is not defined. For home lifts, recommended Indian Standards are IS 14665 and IS 15259. If it is a machine room less elevator then IS 15785, similarly IS 14671 if it is a hydraulic lift.