What are the dimensions of a softball diamond?
What are the dimensions of a softball diamond?
Softball Field Dimensions
| Baseline | 65′ | 60′ |
|---|---|---|
| Home to Second | 91′ 11” | 84′ 10” |
| Home to Front of Rubber | 50′ | 43′ |
| Radius of Skinned Infield | 65′ | 60′ |
| Home Plate to Backstop | 25′ min | 25′ min |
What are the dimensions of a slow pitch softball field?
In adult slowpitch softball, the field dimensions are: Distance between bases: 65 feet (19.81 metres). Pitching distance: 50 feet (15.24 metres). Minimum outfield distance: 275 feet (83.82 metres).
How do you layout a softball diamond?
Second to third is measured from the middle of second base to the back corner of third base, and finally, from the back corner of third base to the back of home plate is the third base line. Home to second base — The distance across the diamond from home plate to second base should be 84 feet and 10 ¼ inches.
How big is an ASA softball?
The largest softball approved by the ASA for regulation play is 16 inches in circumference and used in men’s 16-inch softball games. The 16-inch softball dates back to the beginning of the sport, when the first balls used to play were 16 inches in diameter.
What is the shape of softball diamond?
square
The playing field, or “diamond”, is the square within the infield that surrounds the four bases – the home plate, along with the first, second, and third bases.
What are home plate dimensions?
Home plate is a 17-inch square of whitened rubber with two of the corners removed so that one edge is 17 inches long, two adjacent sides are 8 1/2 inches each and the remaining two sides are 12 inches each and set at an angle to make a point.
What is softball diamond?
The playing field, or “diamond”, is the square within the infield that surrounds the four bases – the home plate, along with the first, second, and third bases.
How far is the fence in slow pitch softball?
Field Specifications For slow pitch played with a 12-inch ball, bases must be 65 feet apart. The pitcher’s platform must be 50 feet from home plate. The minimum fence distance is 300 feet, with the maximum 315 feet.
How big is home plate in slow pitch softball?
Skinned Infields: A 55′ (16.76m) and 60′ (18.29m) radius may be used with the front center of the 46″ (14.02m) pitcher’s plate as the center point of the arc. The 60′ (18.29m) is recommended for 60′ bases.
What ball does Asa use?
44/375 lb ball, although a . 40/375 lb ball is also authorized. The Official Rules of Softball identify the performance levels of softballs allowed in each division of ASA Championship Play. ASA understands that lower compression softballs are in the development process.
What is the difference between ASA and Usssa softball?
USSSA Slowpitch Stamp – Slowpitch Softball Just like for fastpitch, USSSA allows for higher performance than ASA so a USSSA only stamp bat will typically be hotter than a bat with an ASA stamp. USSSA slowpitch is also getting a new stamp which will be on our 2021 line later this year.
Is a square called a diamond in softball?
The infield is a square called a diamond. There is a base at each corner: first base, second base, third base and home plate. The pitching distance is measured from the rear point of the home plate to the front edge of the pitchers plate.
