What are the dimensions of a front loader washing machine?

Although they often offer a large laundry capacity, front-loaders are not usually any wider than top-loading washers. Front-loading models are typically 27 inches wide when offering full-size capacities. They are 36 to 41 ½ inches high and 25 1/4 to 34 3/8 inches deep.

How do you transport a front loader?

How to Transport a Front Load Washer

  1. Slide your front-load washer away from the wall far enough to access the power cord.
  2. Place a bucket on the floor behind your washer.
  3. Move your washer from the laundry room.
  4. Find the shipping bolts that were removed when your washer was first delivered.

Are front loaders a standard size?

Most front loaders are a standard size – 85 x 60 x 60cm – so they can be installed under your kitchen or laundry bench-top, which is handy for smaller households.

How much space do you need for a washing machine?

Washers and dryers placed side by side typically require a horizontal space of 60 inches or five feet. Measure the depth of the appliances (most are around 33 inches) and add six inches for hoses and venting. Allow one inch on each side and between appliances to reduce noise from vibrations.

Will a 60cm washing machine fit in a 60cm gap?

All washing machines fit under a standard height worktop (90cm) and into a 60cm wide housing gap.

Can a front load washer be transported on its side?

A front load washer can not be transported laying down. Transporting it on its side, back, or front will cause severe damage. The machine’s internal components will be harmed, and the outer panels of the washer will be scuffed. Always transport a washer in an upright orientation.

Can you lay a washer on its side to transport?

It’s recommended you always keep a washing machine in an upright position. Laying a washer on its side can cause the inner and outer tubs to bump against each other, which can loosen support pads or damage the suspension.

What are the dimensions of a washing machine?

Standard washer and dryer sizes are generally 27 inches wide, 39 inches tall and 32 to 34 inches deep for front load units. Whereas, top load washers and dryers are typically 27 inches wide, 42 to 44 inches tall and less deep with depths of 27 to 28 inches.

How is washing machine width measured?

The radius of a top loading washing machine tub is measured from the inside edge of the tub wall to the center of the agitator cylinder. The radius of a front loading machine may be calculated by measuring from one top wall to the bottom to locate the diameter. This number, when divided in half, yields the radius.

How much space should be between washing machine and wall?

While measuring, make sure to allow for at least six inches of space between the back wall and the appliance for hoses and ventilation, as well as one inch of clearance between the washer and dryer for side-by-side units.