What are the dimensions of a 4 post lift?
What are the dimensions of a 4 post lift?
Overall Width: 110-1/4″ / 2,800mm. Outside Length: 174″ /4,420mm. Overall Length: 200″ /5,080mm. Height of Columns: 88″ /2,235mm.
How wide is a BendPak lift?
110.25”
BendPak’s HD-7W is the standard-width car lift model in the HD-7 series. With a 110.25” overall width and a spacious 100.25” spread between the columns, there’s plenty of room to park most cars and trucks in the lower position. This leaves ample space for you to maneuver.
How much clearance is needed for a 4 post car lift?
If you want to install a typical 2-post or 4-post lift in your garage, you need a ceiling that’s higher than 11 feet.
How tall are BendPak lifts?
If you need to service vehicles up to 12,000 lbs. capacity with extremely long wheelbases, BendPak’s XPR-12CL-LTA offers nearly 72 inches of reach, compared to 58 inches on our standard triple-telescoping arms. Ideal for hard-to-reach lift points that other two-post lifts cannot access. $9,680 + FREE SHIPPING!
Will a 4-post lift fit in my garage?
Your garage needs enough space before you can install an auto lift. The typical measurements for a 4-post car lift is 103 inches wide by 173 inches long. Most passenger cars have a length of approximately 16 to 17 feet. If the cars you work on fall in this range, then this type of lift may be right for you.
How wide is a 10000 pound car lift?
137″
Specifications
| Style | 2-Post Floor Plate |
|---|---|
| Weight Capacity | 10,000 LBS |
| Overall Width | 137″ |
| Overall Height | 110″ |
| Minimum Lift Height | 3.9″ |
How tall of a garage do I need for a lift?
12 foot
A general rule of thumb is to try for a minimum of 12 foot ceilings in your garage so that you have enough space for the car, the lift, and yourself. Don’t forget to leave enough space around the lift for you to work as well—at least two feet on every side.
How big of a garage do you need for a lift?
As a guideline, count six feet for space underneath, five to six feet for vehicle height and one foot of clearance. That means you need a minimum of 12 feet of ceiling height to comfortably install and work with your auto lift.
How deep does the concrete need to be for a car lift?
The recommended thickness for a car lift concrete slab is 4 inches minimum for most two-post lifts and four-post lifts. Additional thickness may be required for specific applications or different car hoist models.
