Should I use graphite lubricant for locks?

Is Graphite a Good Lubricant for locks? Graphite is a common and stable form of the element carbon, and it has excellent properties as a dry lock lubricant. It can last a long time, and it does not attract dirt. It’s been used in locks for years and years, but it does have drawbacks.

Should I use graphite or wd40 in my locks?

A: Although WD-40 is magic stuff, it is not the best choice to lubricate automotive door locks and linkages. Although it does a good job of cleaning and temporary lubricating, it goes away, so it makes a good first step. Graphite has long been a popular lube choice, but we like to use bike chain lube.

What is graphite lubricant good for?

It creates a quick drying film that provides long-lasting lubrication. It’s recommended as a general maintenance lubricant on gaskets, transfer belts and conveyor belts. Also for use for high temperature, low load, locks, rollers, wheels, gears, chains and hoists.

Do locksmiths use graphite?

Locksmiths have long used powdered graphite to lubricate the workings of locks, and if your key refuses to slide fully into the lock, you can do the same.

What do locksmiths lubricate locks with?

I use Tri-Flow after I rekey most domestic locks. Lock Saver is a dry lubricant and will not attract dust and is recommended for most High Security Locks. Never use oil because it will attract dust and grim. Graphite is the traditional material for lubricating pin tumbler locks, however, I do not like using it.

Is it OK to spray WD-40 in a lock?

Should I use WD40 to lubricate door locks? The simple answer is you should not use WD40 to lubricate locks. WD-40 is one of the solvent-based lubricants and does not contain any lubricant and over time can make your lock even stickier by gumming the lock up.

Can you use graphite after wd40?

Simple answer: don’t worry, there isn’t any adverse reaction between the two.

Should you spray WD40 in a lock?