Is the Plantronics C053 Bluetooth?

Being that the Plantronics CS530 isn’t Bluetooth and doesn’t connect with your computer, there’s a simple fix! You can purchase a USB wireless headset if you choose or you can get the accessory below which will connect your cs530 to a computer.

How do I use my Plantronics C053?

STEP 1 Locate the AC Power Adapter and plug it into the wall power outlet. Plug the other end into your C053 charging base. STEP 3 Included with your Plantronics C053 is a phone cord. Plug the big end into your C053 charging base and the small end into the HEADSET port of your desk phone.

How do I reset my Plantronics C053 headset?

Try resetting your headset. This is done by removing the battery from the headset earpiece, unplugging the AC Power Adapter from the wall power outlet and then waiting for a minute. Then, reinstall the battery, place the headset into the charging base and then plug the AC Power Adapter back into the wall outlet.

How do I connect my Plantronics headset to my desk phone?

​Connect one end of the telephone interface cable to the Savi base. Connect the other end of the telephone interface cable to the headset jack on your desk phone. Press the headset’s call button and the desk phone’s headset button to answer a call or get a dial tone.

How do I reset my Plantronics base station?

1) Place the headset in the base station. 2) Please and hold the sliver button below the Bluetooth icon on the charging/base unit. 4) Then unplug the power supply cable from the base station. 5) After 10 seconds, plug the power supply cable back into the base station.

How do I reset my Plantronics base?

Reset Plantronics Bluetooth Headset

  1. Remove the Plantronics headset from your cell phones paired devices.
  2. Power your cell phone off, then power it back on.
  3. Pair your Plantronics headset back to your cell phone (follow manual if unsure how)
  4. Your Plantronics headset should now be reset.

How do I connect my Plantronics headset to my laptop Windows 10?

Turn the Universal Adapter on. Press and hold the adapter pairing/connect button for 7-10 seconds. When adapter starts flashing red and blue release the buttons. The headset and adapter will flash blue when paired successfully.