Is the Mathews Z7 Extreme a good bow?
Is the Mathews Z7 Extreme a good bow?
Editors’ review. The Mathews Z7 Xtreme is a high quality and great shooting bow from the Z7 series launched by Mathews in 2010. When it comes to shootability, the Xtreme feels almost exactly the same as the original Z7. However, a few interesting changes were introduced by the Mathews design team for this bow.
How fast is a Mathews Z7 Extreme?
Registered. 66.7 pounds, 28″ draw, about a 460 grain arrow at 268 fps.
What year did Mathews make Z7?
2010
Leading the pack for Mathews in 2010 is the new Z7.
What is the let off on Mathews Z7?
Mathews Z7 Specifications
| Brace Height | 7 “ |
|---|---|
| Draw Weight | 40 lbs – 70 lbs |
| IBO Speed | 333 fps |
| Weight | 4.0 lbs |
| Let-Off | 80% |
What’s the difference between Z7 and Z7 Extreme?
Z7 is 7inches and Extreme is 7 5/8 I believe or maybe it was 6 5/8. not much difference other than the ATA by 2″s and a little bit slower IBO…
How old is the Mathews Z7?
Mathews founder Matt McPherson defines his 2010 flagship bow, the Z7, with one word — smooth.
How fast is a Mathews Z7 bow?
332 fps
With a 7-inch brace height and IBO speed rating up to 332 fps, Mathews says its all-new, single-cam Z7 is the ultimate combination of speed and accuracy.
How old is a Mathews Z7?
Mathews Inc. has been on the top single cam market for several years and they plan on maintaining that lead with the introduction of the Z7 for 2010.
How much does a Mathews Z7 Extreme weigh?
3.98 pounds
Bow Specs:
| Bow Specs: | Mathews Z7 Extreme |
|---|---|
| Brace Height: | 7.375″ |
| Mass weight: | 3.98 pounds |
| Let-off: | 80% |
| Draw lengths: | 24-30″ |
How much does the Mathews Z7 weight?
The Z7 measures 30 inches axle-to-axle, weighs 3.97 pounds and features 80-percent letoff. It’s available with peak draw weights from 40-70 pounds and draw lengths from 25-30 inches, in half-inch increments.
How much is a Mathews Z7 Magnum worth?
Retailing $999.00, the Z7 Magnum is in the realm of the market price for high end performance bows, but may be out of reach for some archers.
How do you adjust the draw weight on a Mathews Z7?
Draw weight adjustments are made using either a 3/16” or 7/32” Allen wrench. Turn the limb bolt clockwise to increase the draw weight and counter-clockwise to decrease the weight. Each rotation equals approximately 2 to 4 pounds of draw weight.
