Is stainless steel good for a workbench top?

Stainless Steel Workbench Tops A corrosion-resistant, stainless steel surface and sealed, plastic laminate bottom make these tops suitable for food service. All are oil and stain resistant and meet NSF/ANSI 2 for sanitary design.

What metal is best for workbench tops?

Sheet steel workbench tops require no maintenance other than a wipe down. Sheet steel workbench tops are generally made from 12 gauge sheet steel and sized as a single sheet covering the top work surface of the workbench.

How thick should a steel workbench top be?

A good thickness for the size of table you have would be 1/4″ to 1/2″. If you’re not welding directly on the table then you would be able to use 1’4″. But if you’re going to use it as a fabrication table then to avoid heat distortion I’d recommend 3/8″ to 1/2″. I like a thicker top, for the reasons ccasey pointed out.

What should I use for a workbench top?

The Best plywood’s for workbench tops If you are worried about your budget use a softwood type of plywood with a Hard board or MDF top. The best one to use is Baltic Birch or marine grade plywood. You want to use 3/4 inch or thicker sheets of plywood for stability and strength of your work surface.

What do you cover a workbench with?

Leftover scraps of laminate flooring make a great workbench surface. Laminate is tough and easy to clean—dried glue or paint scrapes right off.

What kind of metal is used in a workbench?

For most industrial applications, workbenches are made from 7, 12, 14, or 16 gauge steel.

What thickness is 11 gauge?

1/8
15 U.S. Code § 206 – Standard gauge for sheet and plate iron and steel

Number of gauge Approximate thickness in fractions of an inch Weight per square foot in kilograms
10 9/64 2.552
11 1/8 2.268
12 7/64 1.984
13 3/32 1.701

Does plywood make a good workbench top?

-thick plywood are a good choice for a strong, stable benchtop. Choose a plywood with no voids and as many layers as possible, such as Baltic birch. Place the top sheet upside down, and glue and screw the middle sheet to it using lines of 1-1/4-in. Spax or deep-threaded drywall screws sunk flush with the surface.