Is Schluter worth the money?

Great product. It takes a little longer than the traditional mud shower bed and water-proofing methods, but it is worth it. Took my old shower down to the studs and completely rebuilt it with DuraRock and then the Schluter Kerdi Shower Kit and 12×16″ tiles.

How much does it cost to install Schluter?

Install the four preformed inside corners, two outside corners around the curb, the Kerdi band and Kerdi on the tray 1-2 hours or less. Let it all set up over night. 3-5 hours, install within 24 hours. Installation cost (what I charge) $250.

What sizes do Schluter shower pans come in?

The trays are available in 39″ x 39″ (100 cm x 100 cm), 55″ x 55″ (140 cm x 140 cm), 48” x 48” (122 cm x 122 cm), 36” x 72” (91 cm x 183 cm), 38” x 76” (97 cm x 193 cm) and 36” x 55” (91 cm x 140 cm) sizes.

What size tile can be used with Schluter shower pan?

Can mosaic tile be used with Schluter ®-DITRA or Schluter ®-DITRA-XL? The minimum required tile format for use with DITRA is 2″ x 2″ (50 mm x 50 mm).

How long will a Schluter shower System last?

Does the Schlüter®-KERDI last a lifetime? For many of our products, sustainability is key and we ensure that all of the materials that we use are built to provide the waterproofing you need for a long time. With our products, you can expect for them to last for upwards of fifty years.

Which is better wedi vs Schluter?

The Wedi materials are less forgiving and fixes for mistakes in your cuts are not recommended. The Schluter system is more forgiving since you can use the Kerdi band, mortar, offcuts and Kerdi fix to.

How long does it take to install a Schluter Shower System?

INSTALLING THE SCHLUTER KERDI MEMBRANE Also, it took me 6 hours to install the system. I decided to cut out my pieces first and this was easily done using a tape measure and scissors. Next, I mixed the mortar. TIP: Make sure you are using the correct type of mortar: unmodified thin-set mortar ANSI A118.

Can Schluter Systems be cut to size?

Can I modify the tray to fit my shower? Yes. The KERDI-SHOWER- T/-TS/-TT trays can be cut to size to fit various applications. Ideally, the tray should be cut by equal amounts on all four sides to ensure a consistent height of the first course of wall tile.

How much can you cut off a Schluter shower pan?

Yes. The KERDI-SHOWER- T/-TS/-TT trays can be cut to size to fit various applications. Ideally, the tray should be cut by equal amounts on all four sides to ensure a consistent height of the first course of wall tile. However, slight differences can typically be made up with thin-set mortar when setting the floor tile.

What is the thickness of a Schluter shower pan?

The shower tray, available in a range of sizes with thicknesses from 1-21/32″ (42 mm) to 2-3/8″ (60 mm), eliminates the need for a mortar bed, and is easy to install.

How long does it take to install a Schluter shower?