Is Samsung SCX 3405 Wireless?

With a footprint of just 15.3” W x 10.8” D x 9.8” H, the Samsung SCX-3405W print/copy/scan MFP prints up to 10,000 sharp, professional pages a month. It’s wireless, so you can set it up virtually anywhere in your home or small office.

How do I reset my Samsung Galaxy SCX-3405W printer?

1. Hold STOP/CLEAR button about 4-5 seconds until the LED flashes once then leave. 2. Hold STOP/CLEAR button again for approximately 15 seconds until the LED stay green, then leave.

How do you change the ink in a Samsung SCX-3405W?

Here’s a quick guide on how to install your new compatible Samsung SCX-3405W toner cartridges:

  1. Lift the scanner top from the front of the machine.
  2. Using the switch on the left side, lift up the cartridge cover.
  3. Pull out the used toner cartridge using the handle and recycle appropriately.

How do I reset my Samsung printer to factory settings?

How To Reset Factory Default Settings for Samsung Printers

  1. You have to press the keys in quick succession MENU # 1 9 3 4. The display will show TECH.
  2. Select the MENU key again followed by ENTER.
  3. Press the < key two times.
  4. Select ENTER.
  5. Press ENTER again.
  6. Exit from this mode by pressing MENU # 1 9 3 4 again.

How do I clear memory on my Samsung printer?

Use these steps to clear the fax memory.

  1. Turn the printer power on.
  2. Press the Menu button on the control panel.
  3. Using the left and right arrows select Network, then press OK.
  4. Using the left and right arrows select Clear Settings, then press OK.
  5. Using the left and right arrows select:
  6. Press OK on the selections above.

How do I scan a document with my Samsung printer?

From the Start menu select Programs or All Programs. Click Samsung Printers, and start Samsung Easy Document Creator. Click Scan ( ) from the home screen. Select the type of scanning or a favorites then click Start.

How do I scan with Samsung SCX?

Click Start > All programs > Samsung Printers, and start Samsung Scan Assistant. Select the Help menu or click the button from the window and click on any option you want to know about. Set the scan options. Click Scan.

How do I connect my Samsung printer to my computer wirelessly?

Configure the wireless settings

  1. Open Samsung Printer Diagnostics on your computer, if it is not already open.
  2. Select Setting up Wireless printing.
  3. Turn on the printer as prompted.
  4. Select the printer.
  5. Press the Wi-Fi Protected Setup (WPS) button on the printer control panel.