Is R12 freon?

Because of this, in the early 1930s, a new refrigerant based on a chlorofluorocarbon (CFC), specifically dichlorodifluoromethane, was developed. It became known as R12 or Freon. When used in refrigerator and A/C systems, R12 cooled incredibly well. And it was safe—neither poisonous to breathe, nor flammable.

What type of freon does a 2008 Ford f150 take?

Late-model Ford F-150s use R-134a freon for their air conditioning systems. Cars began using R-134a to replace R-12 in the early 1990s. R-12 was replaced due to the fact that it was extremely damaging to the ozone, and R-134a has become a much more economically friendly option.

What year did cars switch to R134a?

After the freon used in A/C units was blamed for depleting the ozone layer, automakers were required to switch from R12 to the less harmful R134a refrigerant by 1996.

How much refrigerant does a Ford f150 need?

The owner’s manual for my 2016 says the A/C capacity is 1.5 lbs of R-134A but the A/C specification sticker under the hood says the actual system charge is 1.937 lbs.

Can you replace R12 with 134a?

No. Federal law prohibits topping off an R12 system with a different refrigerant. Your options are to locate some R12, however you must be certified to purchase, and add it with an R-12 recharge hose.

Why is my Ford F 150 AC not working?

The most common reasons a Ford F-150 ac isn’t working are a refrigerant leak, an electrical climate control issue, or a problem with the air conditioning compressor. You may not realize there’s a refrigerant leak until the air conditioner stops blowing cold.

How do you reset the AC on a Ford F 150?

On the HVAC panel controls, press the A/C and Recirc buttons simultaneously, then, release both. Within 2 seconds press the A/C button again.

How much oil goes in a Ford AC compressor?

10 ounces of oil (grey area) When the compressor is delivered to the vehicle assembly plant all the oil is contained in the compressor. 10 ounces in this example. The other system components are dry, no oil.