Is a Dana 60 stronger than a Ford 9 inch?

See all 34 photos With its huge 9-inch ring gear, a beefy Dana 60 should be stronger than a 9-inch Ford. But as these Hoosier Gear photos show, the Dana 60 (left) has only a 1.062-inch hypoid offset, compared to the Ford’s larger 2.250-inch (right).

Is a Ford Dana 60 the same as a Chevy Dana 60?

There are three major variations of the Dana 60 axle used in the 1960s, 70s, and 80s: Dana 60 axles on the GMC, Chevy, and Jeep are all basically the same. Dodge and Ford Dana 60 axles are different.

How much HP can a Dana 60 take?

The Dana 60 can easily handle drivetrains producing 600 horsepower, and is commonly accepted as the strongest passenger car axle you can find. The Dana 60 is also quite adaptable. Just about any ring and pinion combination you want between 3.54:1 and 7.17:1 is still readily available.

What Ford trucks have Dana 60 axles?

Ford uses Dana Super 60 Front Driving Axles in 2005 and newer F250, F350, F450, and F550 Super Duty 4×4 trucks. Each axle is built with a Bill of Material (BOM) Tag affixed to the differential cover by two cover bolts.

Is a Dana 60 a good rear end?

If you want a big brute of a rear end under your car, look no further than a Dana 60. Even in the heyday of muscle cars, Dana 60 rear differentials were renowned for their strength, along with their difficulty to locate. Today, they’re actually incredibly easy to find.

Are Dana 60 axles any good?

Like we said above, the Dana 60 is the stronger axle. If you want to run big tires or big power you need a Dana 60 axle. At the same time, the Dana 44 is a great axle if you don’t need giant tires or big power. Most people don’t realize how heavy a Dana 60 is and how much unsprung weight affects handling.

How much torque can a Dana 60 handle?

Both versions have a torque output rating of 5,500 lb-ft. The Dana 60’s ring gear is 9.75 inches in diameter, and the available gear spread ranges from 3.31:1 to 7.17:1.

Is the Dana 60 a good axle?

What is a Dana 60 Ford?

The Dana 60, a heavier-duty axle than the Dana 44, was first used in the 1950s. It was the axle of choice under countless Dodge, Ford, GM, Studebaker, IH and Jeep 3/4-ton and 1-ton fullsize trucks, as well as Ramchargers and Trail Dusters with the 440ci V-8, and some heavy-duty 1/2-ton Ford and IH trucks.

Is a Dana 70 better than a Dana 60?

The torque rating for a stock Dana 70 axle shaft is 8966 ft/lbs, which is almost 50% stronger than the stock Dana 60 axle shaft, which has a rating of 6044 ft/lbs.