How thick should trailer brake shoes be?

The shoe pad thickness is 1/3 of an inch on Dexter. If the material is less than 1/16 of an inch thick, Dexter says you should replace the shoes.

How do you measure trailer brake shoes?

Brake Drum / Shoe Size Measuring is the same for all brands. Using a tape measure you can do a random measurement as to the diameter by measuring across the drum. If it is a 10-inch drum you will measure approximately 11 inches across for an outside measurement.

What is the minimum thickness of trailer brake shoes?

An air braked commercial motor vehicle shall not be operated with brake lining/pad thickness less than 6.4 mm (1⁄4 inch) or to the wear indicator if the lining is so marked (measured at the shoe center for drum brakes); or less than 3.2 mm (1⁄8 inch) for disc brakes.

How do you measure semi trailer brake shoes?

You can measure the thickness of your brake shoes by using a tire depth gauge. You simply need to push the depth gauge into the rivets on the brake shoes. There can be more than eight rivets on a brake shoe. Measure each one to ensure that your brake shoes are wearing evenly all around.

How do I know what size brake shoes I need?

Expert Reply: To determine whether you need a 10 or a 12 inch brake shoe, you would measure the inside diameter of your brake drum. Depending on the brake assembly, in many instances the cost of a new assembly is the same or just a few dollars more than the replacement brake shoes.

How do you tell what size brakes you have?

Call your local OEM dealer and ask for the original rotor sizes or OEM rotor/pads part numbers based on your vehicle’s VIN number (VIN# is referenced in your ownership papers). The dealership may not tell you the rotor size, but they will give you the genuine part numbers for your vehicle.

How thick are semi brake shoes?

The brake lining/pad thickness on the steering axle of a truck, truck-tractor or bus shall not be less than 4.8 mm ( 3/16 inch) at the shoe center for a shoe with a continuous strip of lining; less than 6.4 mm ( 1/4 inch) at the shoe center for a shoe with two pads; or worn to the wear indicator if the lining is so …

What is the legal limit for rear brake pads?

Grinding – Once the material on brake pads becomes dangerously worn a grinding sound can be heard on depression of the brake. The legal limit for brake pads is approximately three millimetres. Anything less than this will expose the metal sensor making contact with the brake disc.

https://www.youtube.com/watch?v=ak5qKqoD-CY