How tall is the GigBAR 2?

How tall is the GigBAR 2?

15.2″
Compare to Similar Best Sellers

What is DMX mode?

What is DMX? DMX (Digital Multiplex) is a protocol used to control devices such as lights or fog machines. The signal is unidirectional, meaning it only travels in one direction; from the controller or first light, all the way to the last.

How do I reset my gig Bar 2?

Follow the steps below to restore your GigBar to the default settings. Press repeatedly until SYS shows on the display. Press . Use or to select rSEt.

What is a gig bar?

GigBAR 2 is the ultimate pack-n-go 4-in-1 lighting system including UV in its wash lights and strobes for better color mixing and effects. GigBAR 2 includes two LED Derby fixtures, LED wash lights, a laser, and 4 high-power, LED strobe lights all mounted on one bar.

What happens if you don’t use DMX Terminator?

First, you need a terminator for the DMX signal. Without a signal terminator, your DMX signal will reach the end of the line, and bounce back like a rubber ball off a wall. This is known as a reflection and it will interfere with your DMX signal.

Can I control DMX lights with PC?

If you can control your existing lights or devices by Arduino (like using a relay for a smoke machine), you can also adjust the Arduino to act as a DMX slave device (that is, one that receives DMX signals). Second, you’ll need a controller: your PC or laptop is fine, but you’ll need a USB to DMX converter.

How do you reset Chauvet?

How do I perform a factory reset for my Chauvet GigBarLT?

1. Press repeatedly until SYS shows on the display.
2. Press .
3. Use or to select rSEt.
4. Press .

How do you reset a Chauvet Obey 70?

Hold the Step Up button and press Auto/Del. The lights will flash 3 times to confirm that all settings have been reset. This will erase all chases and their steps.