How much HP can you get out of a Ford 360?

The Ford 360 engine is a V8 engine created between 1968 and 1971 with two barrels had 215 horsepower at 4,400 rpm and a max torque of 327 at 2,400 rpm. The later model, which ran from 1972 until 1975, had 196 horsepower at 4,000 rpm and 327 max torque.

Is a Ford 360 engine a big block?

The FE 360 Big-Block under the hood has never functioned well. It’s a heavy engine, topped off by a bulky, cast-iron intake manifold. It gets worse. In 1973, emissions equipment was in its infancy, and cut out more power than it did emissions.

Did Ford ever make a 360 cubic inch engine?

The 361/360, of 360.8 cu in (5.9 L) actual displacement, was introduced in 1968 and phased out at the end of the 1976-year run; it was used in the Ford F Series trucks and pickups.

How many liters is a 360 engine?

5.9 L
The LA 360 cu in (5.9 L) has a bore and stroke of 4 in × 3.58 in (101.6 mm × 90.9 mm). It was released in 1971 with a two barrel carburetor. The 360 used the large intake port 340 heads with a smaller intake valve of 1.88 in (48 mm).

Is a Ford 360 a small block?

The 360 is part of the FE series that includes the 352, 390, 427 and 428 among other motors. most people refer to them as a big block. They are heavy and have a wide intake manifold.

What size is a 360 engine?

The LA 360 cu in (5.9 L) has a bore and stroke of 4 in × 3.58 in (101.6 mm × 90.9 mm). It was released in 1971 with a two barrel carburetor. The 360 used the large intake port 340 heads with a smaller intake valve of 1.88 in (48 mm).

Is the Ford 360 and 390 the same block?

The bore size is the same between a 360 and a 390, but the stroke in a 390 is larger by a small amount, about 0.29 inches (7.24 mm). Also, in trucks, the 360 usually had a Holley 4 barrel carburetor, whereas the 360 came equipped with a Ford 2 barrel carburetor.

What does FE stand for on Ford engines?

Ford Engine
The 428, a long-stroke FE derivative, lived from 1966 to 1970. FE (which means “Ford Engine,” not Ford-Edsel, nor Ford Engineering) variety comes from a broad selection of bore and stroke sizes to achieve cubic-inch displacements. The 332 and 352 are fraternal twins, virtually identical engines with 4.00-inch bores.

Is a 360 A small block?

The fact is, the small block Mopar LA-engines (318, 340 and 360cid) were under-rated at the factory and were the last of the big three small blocks to be offered to the public.