How much does a ZZ4 crate engine cost?

Perhaps the best part of the ZZ4 is not simply its reasonably priced performance (a turnkey ZZ4 crate typically costs under $4,900), but its response to classic engine upgrades.

How much horsepower does a ZZ4 crate motor have?

355 hp
GM claims the ZZ4 will make a respectable 355 hp and 400 lb-ft of torque.

What generation is a ZZ4 engine?

GM part number 24502609 – ZZ4 Crate Engine, 350 Generation I long block, includes 4 bolt main caps, nodular cast iron crank with one piece rear seal, 10.1-1 Compression Ratio hypereutectic pistons, 5.7″ PM rods, 58cc aluminum angle plug heads, hydraulic roller cam (lift .

How do you identify a ZZ4 crate motor?

ZZ4 blocks were painted black and the black valve covers have retaining bolts along the valve cover center, not along the edges as with previous small blocks. The timing chain cover is black 200 mph rated black plastic.

What Cam is in a ZZ4 engine?

10185071 – Hydraulic Roller Camshaft -GM ZZ4 Crate Engine.

What year is a ZZ4 engine?

Evolution Of The ZZ 350 Crate EngineIntroduced in 1996, today’s ZZ4 crate engine evolved from a long line of ZZ 350s that first debuted back in 1989 with the ZZZ 350, an assembly that arguably began the modern crate engine era.

What is a 350 ZZ4?

The ZZ4 350 Turn-Key crate engine has been one of the most popular high performance crate engines since GM Performance Parts was started. Its legendary status is based on an incredible performance level that is stone cold reliable.

What year did the ZZ4 come out?

The ZZ4 version of GM’s crate engine appeared in 1996 and became the longest-running ZZ engine with production all the way through 2014. Official power ratings for the ZZ4 were 355 hp and 418 lb-ft.

When did the ZZ4 come out?

How do I identify a GM crate motor?

These numbers are located on the Passenger side front, on a square pad on the deck surface. You’ll want to look at the PO4 number. For instance a 2009 engine would say 9PO4, a 2006 engine would say 6P04, etc.

Does a ZZ4 have a roller cam?

Description. This hydraulic roller tappet is used on the 350 ZZ3 & ZZ4 engines. Maximum lift with 1.5:1 rocker ratio (intake/exhaust) is 474/510. Valve lash is zero/zero and lobe centerline is 112 degrees.

What are ZZ4 heads?

Topping the ZZ4 is the aluminum L98 cylinder head that was available on the pre-LT1 Corvette. The aluminum angle-plug cylinder heads have screw in rocker studs, 1.94-inch intake and 1.50-inch exhaust valves and 58cc combustion chambers that yield a crisp and responsive 10:1 compression ratio.

Who makes the best crate engine?

Best Crate Engine For The Money. Today, we can find a lot of suitable options when we are looking for a crate engine for our pair of wheels. But few of them are worth every single penny. Below are top three of those options : 1. Genuine GM (10067353) 350ci / 5.7L Gen 0 Engine. Check Price on Amazon! Main Features

Where to buy crate engine?

Colorado Engine is your source for quality crate engines Factory Crate Engine Source for: Cars. Trucks. Diesel. H.P. Marine. Drop-In. What you can expect from our crate engine services: Import & Domestic – Remanufactured. National warranties. Expert knowledgeable counter men. Delivered or drop shipped to any US location. Large inventory at

How to buy crate engine?

A short block includes a balanced rotating assembly and little else.

  • A long block usually comes with cylinder heads,oil pan,camshaft,and valve covers,along with horsepower and torque ratings
  • A fully dressed engine includes everything except front

    • What are crate engines?

    The engine is the ZZ632/1000, and as its name implies, it displaces 632 cubic inches and makes 1000 horsepower. The massive engine is available to purchase at an MSRP of right at $38,000.