How many gpm does a 1 HP pool pump?

52 GPM
From this chart, you can see that a 1 horsepower pump (the green curve) will give you 52 GPM flow on a system with 64 feet of head.

How many gpm should I run my pool pump?

Once you have your pool’s volume, divide it by eight to determine the number of gallons per hour (GPH) that need to be pumped. Most pool pumps go by gallons per minute rather than GPH, though. So to get that number, divide the GPH by 60 to determine how many gallons per minute (GPM) need to be pumped for full turnover.

How many GPH does a 1 HP pool pump?

60
Pool Pump Operating Costs

Pump Size GPM (varies with plumbing) Cost/Hour
1.0 HP 60 $0.06
1.5 HP 68 $0.09
2.0 HP 76 $0.12
3.0 HP 85 $0.18

How many GPH should a pool have?

What you’re looking for is a pump that will be able to pump all the water in your pool through the filter in no more than 8-10 hours. This typically looks likes 40 GPM (gallons per minute) for smaller pools and 80 GPM for larger pools.

How many GPM will a 3/4 HP pump?

Horsepower: 3/4. Flow: 10 GPM @ 100′ with 50 PSI discharge pressure.

How many gpm does a 3/4 HP pool pump?

Doheny’s Above Ground Pool Pump,115 volt, ¾ hp – Max flow rate is 62 gallons per minute (gpm) and max feet of head is 30 feet. Doheny’s Above Ground Pool Pump,115 volt, 1 hp – Max flow rate is 75 gallons per minute (gpm) and max feet of head is 38 feet.

What is the best speed to run a pool pump?

If you are running your pool pump to filter and turn your water over, we recommend using the middle and lower speed settings. For example, for the first few days, you might run the pump at 2500 RPMs to see what your pool looks like. Next, you might dial it down to 1600 RPMs.

What horsepower must a pump deliver to water that must be lifted 100 feet when the flow is 100 gallons per minute?

Example – Horsepower Required to Pump Water

Power Required to Pump Water (hp)
Volume Flow (gpm) Height (ft)
80 0.101 0.404
90 0.114 0.455
100 0.126 0.505

How many gallons per minute does a 2 HP pump?

Number of submersible well pump stages determine pump lift capacity

Table of Submersible Pump Stages vs HP vs Total Dynamic Head vs. GPM Flow Rate Capacity
Water Pump HP Nr. of Pump Stages GPM Flow Rate Capacity
1 1/2 HP 11 4 – 40 GPM (varies by TDH)
2 HP 14 4 – 42 GPM (varies by TDH)
3 HP 19 4 – 43 GPM (varies by TDH)