How many amps does a jigsaw pull?

Power and Performance Corded jigsaws range from 3 to 8 amps with 5 or more amps providing optimal power for heavy-duty use. Orbital action uses a back and forth motion in addition to up and down movements for faster, more aggressive cuts.

What is a good amp for a jigsaw?

Motor Power Like most tools, higher amperage ratings indicate jigsaws that have more cutting power. The best jigsaws will have motor ratings of 6.5 or 7 amps; bargain saws might be rated for 5 amps or less.

Do I need a variable speed jigsaw?

If you are planning on using your jigsaw for a range of different tasks, a model with a variable speed motor is essential. It will allow you to control the speed and accuracy your cut and tackle a variety of applications and materials with greater finesse.

How do I choose a jigsaw machine?

Here are a few of the key aspects to consider when buying a jigsaw.

  1. How Many Strokes Per Minute?
  2. How Many Amps?
  3. Corded or Cordless?
  4. What Is the Stroke Length?
  5. Straight or Orbital Cutting Action?
  6. T-Shank or U-Shank Blades?
  7. Any Extras?

Is a 5 amp jigsaw powerful enough?

5 amps or 18 volts should be enough for DIY use. For heavy duty work, go with a 7 or 8 amp corded model, or a 20-volt cordless.

Is 8 amps a lot?

The typical amperage for small power tools (sander, jigsaw, etc.) is 2 to 8 amps. For larger power tools (router, circular saw, tablesaw, lathe etc.), 6 to 16 amps is typical. Some tools such as duct collectors and air compressors may need even more power.

Is 5 amp jigsaw enough?

How much power does a jigsaw need?

between 350 to 700 watts
Domestic jigsaw usually works between 350 to 700 watts while the upper limit of a professional jigsaw can reach up to 1500 watts. However, a jigsaw power mustn’t be less than 700 watts. It is recommended to look for the maximum depth of cutting along with the power.

What speed should I use my jigsaw?

For softwoods, softer hardwoods (poplar, mahogany, alder, etc.), and sheet goods, run your jigsaw at its highest speed for most cuts. If you encounter resistance, back off the speed slightly. Dense hardwoods, such as cherry, maple, oak, and walnut, call for a slower blade speed to avoid burning.

Can a jigsaw cut a 2×4?

Want To Share This? A jigsaw is a precision tool with a thin blade, which makes them ideal at cutting intricate designs on thin material. If you ever had to cut a 2×4 piece of framing lumber with a jigsaw and thought to yourself… “there’s no way”, you might be surprised!

How thick can a jigsaw cut?

Jigsaws work best for cutting softwood that’s no more than 1-1/2 in. thick and hardwood up to 3/4 in. thick. Jigsaw blades tend to bend when cutting curves in thicker boards, leaving a beveled edge rather than a square one.

What is a brushless jigsaw?

In a tool with a brushless motor, the motor adjusts according to the task. The more resistance a drill or saw senses, the more power it draws, and conversely a lack of resistance lessens the pull.