How long does it take to get shingles delivered?

Get your shingles delivered quickly Or, upon your request, we will deliver in-stock roofing products to your job site within 100 miles of a store within 3 hours.

How long are shingles rated for?

Composite shingles or tiles are tiles made of a mix of fiberglass, recycled paper products, and asphalt and they are designed to mimic the look of slate or cedar roofing. They are similar in pricing to standing seam roofs, are rated for up 110 MPH in wind uplift, and they can last for approximately 30 to 50 years.

How far should shingles hangover?

Shingles should not extend more than 3/4” (19 mm) past the drip edge. If shingles overhang the edge of the roof by more than 3/4” (19 mm), then they are not supported and may crack and break off. In addition, the wind resistance at the roof edge may be compromised.

Are Timberline HD shingles Class 4?

Timberline® ArmorShield™ II Impact-Resistant Shingles combine the beauty of Timberline® (North America’s #1-selling shingle) with UL 2218 Class 4 Impact Resistance.

How shingles are delivered?

Shingles are delivered on a boom truck and unloaded directly onto your roof. This can happen at different points in the job, depending on the size of the roof. The materials typically get delivered mid-tear off.

How long will 30 year shingles last?

The expected service life of a 30-year product, if properly cared for, is approximately 25 years. If it’s not cared for properly, that 30 year shingle will only last 12 to 15 years. That’s one of the big misconceptions in the roofing marketplace.

Do shingles have to overhang drip edge?

The edge of the shingles should hang over a roof between an inch and an inch and a half — or between a half inch and three-quarters of an inch if drip edge flashing is installed. Too much overhang and the shingles could blow off in high winds; too little can allow water to seep into rake or fascia boards.

How do you extend a shingles overhang?

To fix an overhang that’s too short, buy some aluminum drip edge (aka drip-cap flashing). It’s typically sold in 8-ft. lengths, and can be cut with tin snips or even poultry shears. Slide the wide, flat flange of the flashing under the first course of shingles and adjust it to extend over the gutter.

What is the difference between GAF HD and HDZ?

The difference with the HDZ from the HD is that it has a 99% nailing accuracy due to its StrikeZone nailing area feature that is 600% larger. It is also gives you a 30% faster nail fastening upon installation than the HD.

What is the difference between GAF Timberline HD and HDZ?

Timberline HDZ – HDZ shingles feature a similar appearance to the GAF Timberline HD shingles, but the HDZ shingles feature the Dura Grip sealant and the StrikeZone nailing area, which offers 30% faster nail fastening than HD shingles. These shingles however are still compatible with HD ones.