How long does it take for GacoPatch to cure?

Dry Time At ⅛” (3.2 mm) thick, in 75 °F (24 °C) temperatures and 55% relative humidity, GacoPatch will be tack-free in 4 hours, fully cured in 40 hours, but can be rained on within 60 minutes. Product is moisture cure; low humidity will result in longer cure times.

Can GACO be painted?

CAN A ROOF COATED WITH GACOPRO OR GACOPRO ECO BE PAINTED OVER? Given the fact that GacoPro is a Silicone material, it is not possible to overpaint with anything except a new coat of GacoPro.

What is GacoPatch used for?

September 26, 2016 – Gaco Western has developed GacoPatch, a fiber reinforced silicone roof patch designed for repairing roof leaks in a one-step application. Primers, seam tapes and top coats are not required.

Will GACO stick to silicone?

Suitable substrates include silicone, aged asphalt (not for use on 3-tab asphalt or architectural shingles), aged EPDM and TPO/CPA (may require GacoFlex E5320), built-up, cap sheet, composite, concrete, fiberglass, metal, modified bitumen, torchdown and sprayed polyurethane foam.

How long does GACO coating last?

Compared to acrylics, asphalts, and urethane coatings, Gaco coating offers superior quality and lasts a lifetime. One of the convenient elements of GacoRoof is that it comes in a range of colors and so, it is easily matched to any roofing aesthetic you’re going for.

Can GACO be recoated?

If your existing deck coating is waterproof and in good condition, you may recoat the surface using one coat of GacoDeck Primer, followed by one or two coats of GacoDeck TopCoat for Maintenance. If the deck coating leaks, is worn, or has cracks or holes, you may recoat the surface.

How do I get rid of GACO?

You can leave the bucket uncovered overnight to allow the residual coating to dry. Pull the dry coating out of the bucket and dispose of it in your trash container. The dried coating is inert. The bucket can then be reused or recycled.

How do you use GACO?

Apply by brush or ¾” nap woven roller as received. For spray application, use as received; consult Gaco Western’s Silicone Spray Guide SG-Silicone for more information. For cold weather application, keep material stored above 65°F (18°C). Do not apply if rain is expected within 1 hour.