How long does Hydroban take to dry?

Allow HYDRO BAN a minimum 2 hours cure at 70°F (21°C) prior to flood testing in these conditions. Protect from exposure to traffic or water until fully cured. HYDRO BAN will go from a light sage green to a darker olive green when fully cured. The second coat should not be applied until the first coat is fully cured.

How much Hydroban do I need?

For most applications, apply a 6 mil coat of HYDRO BAN Quick Cure liquid with brush or roller over substrate including pre-treated areas. Flash membrane up over pre-treated coves and corners, so such areas have two layers of HYDRO BAN Quick Cure liquid.

How long does concrete need to cure before waterproofing?

Concrete continues to cure long after the concrete is poured. This curing process will expel water vapour and air for days after the concrete appears to be set. Sydney waterproofing companies will generally advise a waiting period of at least 7 days from pouring before a waterproof coating is applied.

How long can RedGard be exposed?

If tile is not going to be set immediately after curing, RedGard should be protected from rain, direct sunlight and inclement weather for 72 hours after application. If delays longer than 72 hours are expected, cover with felt paper.

Can Hydroban be used over Kerdi?

So technically, they support the waterproofing bond you’ll get when applying Hydroban over Kerdi fleece. If the installation will support it (and if you’ll already have it on hand), you could also use anti-fracture fabric instead of Kerdi.

How do I know if my concrete is cured?

The only way to know if a concrete slab is dry is to test it. The most accurate test for doing this is the in situ relative humidity test. Data logging throughout the drying process allows you to detect drying problems early, correct them, and will aid you to determine what is responsible for slow drying.

How long does it take for 1 inch of concrete to dry?

approximately 30 days
A good rule of thumb is that concrete takes approximately 30 days to dry for every one inch of poured concrete.