How is bone dry weight calculated?

Moisture content wet basis expressed as a percentage of the wet weight of the material (g water/100 g sample): m = 100Wm / (Wm + Wd) where m: wet basis moisture content, Wm: water weight and Wd: bone dry weight of material. A simple way to calculate is: m = (WW-DW) / WWx100%, WW: wet weight, and DW: dry weight.

What is BDMT?

BDMT means bone dry metric tonnes; Sample 1. Sample 2. BDMT means bone dry metric tonnes which is 1000 kilograms.

What is a green ton?

Green ton. 2,000 pounds of undried biomass material. Moisture content must be specified if green tons are used as a measure of fuel energy.

What is an oven dry tonne?

The term “oven-dry” in this text is used in relation to the weight of a product in a completely dry state, e.g. an oven-dry metric ton of wood fibre means 1,000 kg of wood fibre containing no moisture at all.

What is bone dry weight?

Bone Dry Ton or “BDT” means a unit of weight equal to 2,000 pounds of woody material at zero percent (0%) moisture content.

How do you convert dry weight to fresh weight?

Multiply the weight of the “wet” grain by the initial percent dry matter content, then divide the result by the desired ending percent dry matter content.

What does CCF stand for in timber?

The US Forest Service is required to sell wood in units of hundred cubic feet (ccf). Your permit allows you to cut 4 ccf, which is equivalent to 5 cords of wood, or 15 face cords (also called rick cords or a rick). A cord of wood is 4 feet by 4 feet by 4 feet.

What is a unit of wood chips?

1 BDT of chips, = 200 cubic feet (a.k.a 1 unit of chips)

What is air dry metric ton?

What is an ADMT? ADMT stands for air-dried metric ton (2204.6 lbs.), which is a weight measurement for selling woodpulp. How is ADMT used to calculate an invoice? Pulp gains and loses moisture as the humidity and temperature change.

How do you calculate dry weight percentage?

Weigh and record the container and feed weight immediately after drying. Subtract the weight of the container from the total weight (Step 6) to determine the weight of the feed after drying. Divide the weight of the dry feed (Step 4) by the weight of the wet feed (Step 7). Multiply by 100 to get a percentage.

How do you calculate dry weight basis?

To calculate the protein on a dry matter basis, you remove the water, so 100 g powder – 5.3 g water = 94.7 grams of dry matter. You convert from “as is” to DMB by taking the percentage protein on a DMB basis and dividing by the new percentage of dry product: % protein DMB = as is protein / (1- % water).

What is the difference between dry weight and wet weight?

Dry weight is what the bike weighs without fluids. That’s without gas, oil, coolant, final drive fluid, or sometimes even the brake fluid and battery! Wet weight is measured with some or all of the fluids in the bike. For example, a wet weight might include all fluids with a full tank of gas, ready to ride.